PA 700 AOS H
Swage fitting, DKOS
Product image
![PA 700 AOS H PA 700 AOS H](/data/img/product/PA_700_AOS_H.jpg)
![PA 700 AOS H - data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif - PA 700 AOS H](/data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif)
Properties
Application |
Swage fitting for HD 700 hoses |
Connection 1 |
metric nut thread |
Sealing form 1 |
24° outer cone with O-ring |
Short code |
DKOS |
Standard |
ISO 8434-1 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Additional feature |
for breaker operation |
Material |
Steel |
Surface |
electro galvanised |
Description
Reinforced design for extreme loads, e.g. use in hammers.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | G1 | for external pipe Ø (mm) |
L1 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|
PA 720 AOS H | 19 | 12 | 3/4" | M 36 x 2 | 25 | 104,0 | 46 | 20.0 x 2.5 |
PA 725 AOS H | 25 | 16 | 1" | M 42 x 2 | 30 | 111,0 | 50 | 25.0 x 2.5 |
PA 732 AOS SH | 31 | 20 | 1.1/4" | M 52 x 2 | 38 | 114,0 | 60 | 33.0 x 2.5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.