Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PA 700 SF6 45 PLUS
Swage fitting, SFS angle 45°
Product image
Properties
| Application |
Swage fitting for HD 700 PLUS hoses |
| Connection 1 |
SAE flange connection 6000 PSI |
| Sealing form 1 |
flat seal with SF O-ring |
| Short code |
SFS |
| Standard |
SAE J518 ISO 6162-2 |
| Integration |
with pull-out protection (interlock) |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Flange size | Operating pressure (bar) |
D (mm) |
H (mm) |
L1 (mm) |
L2 (mm) |
|---|---|---|---|---|---|---|---|---|---|
| PA 720 SF6 45 PLUS | 19 | 12 | 3/4" | 3/4" | 420,0 | 41,3 | 8,8 | 152,9 | 40,0 |
| PA 720 SF6 25 45 PLUS | 19 | 12 | 3/4" | 1" | 420,0 | 47,6 | 9,6 | 144,9 | 32,0 |
| PA 725 SF6 45 PLUS | 25 | 16 | 1" | 1" | 420,0 | 47,6 | 9,6 | 190,5 | 50,0 |
| PA 725 SF6 32 45 PLUS | 25 | 16 | 1" | 1.1/4" | 420,0 | 54,0 | 10,5 | 190,6 | 50,0 |
| PA 732 SF6 45 PLUS | 31 | 20 | 1.1/4" | 1.1/4" | 420,0 | 54,0 | 10,5 | 211,0 | 60,0 |
| PA 732 SF6 45 L 39 PLUS | 31 | 20 | 1.1/4" | 1.1/4" | 420,0 | 54,0 | 10,5 | 211,0 | 39,0 |
| PA 740 SF6 45 PLUS | 38 | 24 | 1.1/2" | 1.1/2" | 420,0 | 63,5 | 12,6 | 273,0 | 80,0 |
| PA 740 SF6 45 L 70 PLUS | 38 | 24 | 1.1/2" | 1.1/2" | 420,0 | 63,5 | 12,6 | 263,0 | 70,0 |
| PA 750 SF6 45 PLUS | 51 | 32 | 2" | 2" | 420,0 | 79,4 | 12,6 | 297,6 | 69,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.