PA 700 SF6 45 VA
Swage fitting, SFS angle 45°Product image
Properties
Application |
Swage fitting for HD 700 hoses |
Connection 1 |
SAE flange connection 6000 PSI |
Sealing form 1 |
flat seal with SF O-ring |
Short code |
SFS |
Standard |
SAE J518 ISO 6162-2 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Stainless steel |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Flange size | Operating pressure (bar) |
D (mm) |
H (mm) |
L2 (mm) |
---|---|---|---|---|---|---|---|---|
PA 725 SF6 45 VA | 25 | 16 | 1" | 1" | 420,0 | 47,6 | 9,5 | 40,0 |
PA 732 SF6 45 VA | 31 | 20 | 1.1/4" | 1.1/4" | 420,0 | 54,0 | 10,3 | 46,0 |
PA 732 SF6 40 45 VA | 31 | 20 | 1.1/4" | 1.1/2" | 420,0 | 63,5 | 12,6 | 48,0 |
PA 740 SF6 45 VA | 38 | 24 | 1.1/2" | 1.1/2" | 420,0 | 63,5 | 12,6 | 48,0 |
PA 740 SF6 50 45 VA | 38 | 24 | 1.1/2" | 2" | 420,0 | 79,4 | 12,6 | 65,0 |
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- PA 700 SF6 45
- Swage fitting, SFS angle 45°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.