PA 700 SF 90
Swage fitting, SFL angle 90°Product image
Properties
Application |
Swage fitting for HD 400 hoses |
Connection 1 |
SAE flange connection 3000 PSI |
Sealing form 1 |
flat seal with SF O-ring |
Short code |
SFL |
Standard |
SAE J518 ISO 6162-1 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Flange size | Operating pressure (bar) |
D (mm) |
H (mm) |
L1 (mm) |
L2 (mm) |
---|---|---|---|---|---|---|---|---|---|
PA 713 SF 90 | 12 | 8 | 1/2" | 1/2" | 350,0 | 30,2 | 6,7 | 85,9 | 45,0 |
PA 713 SF 20 90 | 12 | 8 | 1/2" | 3/4" | 350,0 | 38,1 | 6,7 | 96,0 | 51,0 |
PA 720 SF 90 | 19 | 12 | 3/4" | 3/4" | 350,0 | 38,1 | 6,8 | 127,5 | 58,0 |
PA 720 SF 25 90 | 19 | 12 | 3/4" | 1" | 320,0 | 44,5 | 8,1 | 127,5 | 61,0 |
PA 725 SF 20 90 | 25 | 16 | 1" | 3/4" | 320,0 | 38,1 | 6,8 | 144,0 | 64,5 |
PA 725 SF 90 | 25 | 16 | 1" | 1" | 280,0 | 44,5 | 8,1 | 158,0 | 67,0 |
PA 725 SF 32 90 | 25 | 16 | 1" | 1.1/4" | 280,0 | 50,8 | 8,1 | 158,0 | 69,5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.