PAY 500 HS
Swage fitting, CES
Product image
![PAY 500 HS PAY 500 HS](/data/img/product/PAY_500_HS_Foto.jpg)
![PAY 500 HS - data/img/product/PAY_500_HL_HS_Zeichnung.jpg data/img/product/PAY_500_HL_HS_Zeichnung.jpg - PAY 500 HS](/data/img/product/PAY_500_HL_HS_Zeichnung.jpg)
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
24° inner cone |
Short code |
CES |
Standard |
ISO 8434-1 |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | G1 | for external pipe Ø (mm) |
---|---|---|---|---|---|
PAY 506 HS | 6 | 4 | 1/4" | M 18 x 1.5 | 10 |
PAY 508 HS | 8 | 5 | 5/16" | M 20 x 1.5 | 12 |
PAY 510 HS 08 | 10 | 3 | 3/8" | M 20 x 1.5 | 12 |
PAY 510 HS | 10 | 6 | 3/8" | M 22 x 1.5 | 14 |
PAY 513 HS | 12 | 8 | 1/2" | M 24 x 1.5 | 16 |
PAY 516 HS | 16 | 10 | 5/8" | M 30 x 2 | 20 |
PAY 520 HS | 19 | 12 | 3/4" | M 36 x 2 | 25 |
PAY 525 HS | 25 | 16 | 1" | M 42 x 2 | 30 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.