Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PN SF6 45 VA
Swage nipple, SFS angle 45°
Product image
 45_MEx.gif "PN SF6 45 VA - data/img/product/PNxxSF(SFK,SF6,SF9) 45_MEx.gif")
Properties
| Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
| Connection 1 |
SAE flange connection 6000 PSI |
| Sealing form 1 |
flat seal with SF O-ring |
| Short code |
SFS |
| Standard |
SAE J518 ISO 6162-2 |
| Material |
Stainless steel |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Flange size | Operating pressure (bar) |
D (mm) |
H (mm) |
L2 (mm) |
|---|---|---|---|---|---|---|---|---|
| PN 13 SF6 45 VA | 12 | 8 | 1/2" | 1/2" | 420,0 | 31,8 | 7,7 | 32,0 |
| PN 13 SF6 20 45 VA | 12 | 8 | 1/2" | 3/4" | 420,0 | 41,3 | 8,8 | 35,0 |
| PN 16 SF6 13 45 VA | 16 | 10 | 5/8" | 1/2" | 420,0 | 31,8 | 7,7 | 35,0 |
| PN 16 SF6 20 45 VA | 16 | 10 | 5/8" | 3/4" | 420,0 | 41,3 | 8,8 | 35,0 |
| PN 20 SF6 45 VA | 19 | 12 | 3/4" | 3/4" | 420,0 | 41,3 | 8,8 | 40,0 |
| PN 20 SF6 25 45 VA | 19 | 12 | 3/4" | 1" | 420,0 | 47,6 | 9,5 | 31,0 |
| PN 25 SF6 45 VA | 25 | 16 | 1" | 1" | 420,0 | 47,6 | 9,5 | 38,5 |
| PN 25 SF6 32 45 VA | 25 | 16 | 1" | 1.1/4" | 420,0 | 54,0 | 10,3 | 47,5 |
| PN 32 SF6 45 VA | 31 | 20 | 1.1/4" | 1.1/4" | 420,0 | 54,0 | 10,3 | 47,0 |
| PN 32 SF6 40 45 VA | 31 | 20 | 1.1/4" | 1.1/2" | 420,0 | 63,5 | 12,6 | 43,0 |
| PN 40 SF6 45 VA | 38 | 24 | 1.1/2" | 1.1/2" | 420,0 | 63,5 | 12,6 | 48,0 |
| PN 40 SF6 50 45 VA | 38 | 24 | 1.1/2" | 2" | 420,0 | 79,4 | 12,6 | 64,0 |
| PN 50 SF6 45 VA | 51 | 32 | 2" | 2" | 420,0 | 79,4 | 12,6 | 60,0 |
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- PN SF6 45
- Swage nipple, SFS angle 45°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.