Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PR V2 (Z)
Imperial precision steel pipe, 1.4541
Product image
Properties
| Design |
Precision steel pipe, imperial |
| Material |
Stainless steel 1.4541 |
| Pipe length |
6 m |
Note
The pressure figures are based on straight pipes.
The appropriate wall thickness needs to be calculated for pipes with bends as stipulated in DIN EN 13480-4.
Item
Sort upwards
Sort downwards
 Identification |
Ø d2 (mm) |
AD tolerance +/- (mm) |
Ø d1 (mm) |
ID tolerance +/- (mm) |
S (mm) |
Specific load I (bar) |
Specific load III (bar) |
|---|---|---|---|---|---|---|---|
| PR 38-2.6 V2 | 38,00 | - | 32,80 | - | 2,60 | - | - |
| PR 12.7-0.91 V 2 | 12,70 | 0,08 | 10,88 | 0,15 | 0,91 | 158 | 121 |
| PR 13.5-2.3 V 2 | 13,50 | 0,08 | 2,30 | 0,15 | 8,90 | 451 | 318 |
| PR 13.5-2.9 V 2 | 13,50 | - | 2,90 | - | 7,70 | - | - |
| PR 17.2-2.9 V 2 | 17,20 | - | - | - | 2,90 | - | - |
| PR 26.9-2.3 V 2 | 26,90 | 0,08 | 22,30 | 0,15 | 2,30 | 227 | 171 |
| PR 26.9-2.6 V 2 | 26,90 | 0,08 | 21,70 | 0,08 | 2,60 | 268 | 199 |
| PR 26.9-3.2 V 2 | 26,90 | 0,08 | 20,50 | 0,15 | 3,20 | 326 | 238 |
| PR 33.7-1.6 V2 | 33,70 | 0,08 | 30,50 | 0,08 | 1,60 | 126 | 98 |
| PR 33.7-2 V2 | 33,70 | 0,08 | 29,70 | 0,08 | 2,00 | 161 | 124 |
| PR 33.7-2.6 V 2 | 33,70 | 0,08 | 28,50 | 0,15 | 2,60 | 207 | 157 |
| PR 33.7-3.2 V 2 | 33,70 | - | 27,30 | - | 3,20 | - | - |
| PR 48.3-2.6 V 2 | 48,30 | 0,20 | 43,10 | 0,20 | 2,60 | 134 | 104 |
| PR 48.3-4.05 V 2 | 48,30 | 0,20 | 40,20 | 0,20 | 4,05 | 223 | 168 |
| PR 60.3-2 V 2 | 60,30 | 0,20 | 56,30 | 0,20 | 2,00 | 78 | 62 |
| PR 60.3-5 V 2 | 60,30 | 0,20 | 50,30 | 0,20 | 5,00 | 225 | 170 |
| PR 76.1-2 V 2 | 76,10 | 0,20 | 72,10 | 0,20 | 2,00 | 62 | 49 |
| PR 76.1-3.2 V 2 | 76,10 | 0,20 | 72,10 | 0,20 | 2,30 | - | - |
| PR 88.9-4.5 V 2 | 88,90 | 0,45 | 79,90 | 0,50 | 4,50 | 118 | 92 |
| PR 101.6-4.05 V 2 | 101,60 | 0,45 | 93,50 | 0,50 | 4,05 | 90 | 71 |
| PR 114.3-3.6 V 2 | 114,30 | 0,50 | 107,10 | 0,70 | 3,60 | 62 | 49 |
Additional information
Calculation as in DIN 2413 (draft)
Specific load I: static (up to 100 °C)
Specific load III: dynamic (up to 200 °C) stress range = P bar
Strength parameter: K 222 [N/mm2]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 180 [N/mm2]
Tolerance: DIN 10305-4
Elastic strength to DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.