XDWM VA
Banjo fitting, throttle free, angle 90°
Product image
![XDWM VA XDWM VA](/data/img/product/XDWM_VA.jpg)
![XDWM VA - data/img/product/XDWM_MEx.gif data/img/product/XDWM_MEx.gif - XDWM VA](/data/img/product/XDWM_MEx.gif)
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
Edge sealing ring |
Connection 2 |
metric cylindrical outer thread |
Sealing form 2 |
24° inner cone |
Design |
Banjo coupling, throttle free |
Construction |
Angle 90° |
Standard |
DIN 2353 ISO 8434-1 |
Scope of supply |
Socket (without union nut and cutting ring) |
Material |
Stainless steel |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Series | Operating pressure | Ø d2 (mm) |
G | Ø D (mm) |
i (mm) |
L1 (mm) |
L2 (mm) |
L4 (mm) |
L7 (mm) |
AF (mm) |
S1 | S2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
XDWM NW 04 HL VA | L | PN 160 | 6 | M 10 x 1 | 14 | 8 | 24 | 12 | 12,5 | 19 | 19 | 6 | 6 |
XDWM NW 06 HL VA | L | PN 160 | 8 | M 12 x 1.5 | 17 | 12 | 30 | 15 | 14,5 | 21 | 22 | 6 | 6 |
XDWM NW 08 HL VA | L | PN 100 | 10 | M 14 x 1.5 | 19 | 12 | 30 | 16 | 15,5 | 22 | 22 | 8 | 8 |
XDWM NW 10 HL VA | L | PN 100 | 12 | M 16 x 1.5 | 21 | 12 | 37 | 18 | 18,0 | 25 | 27 | 10 | 10 |
XDWM NW 13 HL VA | L | PN 100 | 15 | M 18 x 1.5 | 23 | 12 | 40 | 20 | 21,0 | 26 | 30 | 12 | 12 |
XDWM NW 16 HL VA | L | PN 100 | 18 | M 22 x 1.5 | 27 | 14 | 46 | 23 | 21,5 | 29 | 36 | 14 | 14 |
XDWM NW 20 HL VA | L | PN 100 | 22 | M 26 x 1.5 | 31 | 16 | 51 | 25 | 26,0 | 33 | 41 | 17 | 17 |
XDWM NW 25 HL VA | L | PN 100 | 28 | M 33 x 2 | 39 | 18 | 64 | 32 | 31,5 | 39 | 50 | 22 | 22 |
XDWM NW 32 HL VA | L | PN 63 | 35 | M 42 x 2 | 49 | 20 | 76 | 37 | 35,5 | 46 | 60 | 27 | 27 |
XDWM NW 40 HL VA | L | PN 63 | 42 | M 48 x 2 | 55 | 22 | 85 | 42 | 40,0 | 51 | 65 | 32 | 32 |
XDWM NW 03 HS VA | S | PN 160 | 6 | M 12 x 1.5 | 17 | 12 | 30 | 15 | 16,5 | 23 | 22 | 6 | 6 |
XDWM NW 04 HS VA | S | PN 160 | 8 | M 14 x 1.5 | 19 | 12 | 30 | 16 | 16,5 | 23 | 22 | 8 | 8 |
XDWM NW 06 HS VA | S | PN 100 | 10 | M 16 x 1.5 | 21 | 12 | 37 | 18 | 18,5 | 26 | 27 | 10 | 10 |
XDWM NW 08 HS VA | S | PN 100 | 12 | M 18 x 1.5 | 23 | 12 | 41 | 20 | 20,5 | 28 | 30 | 12 | 12 |
XDWM NW 10 HS VA | S | PN 100 | 14 | M 20 x 1.5 | 25 | 14 | 42 | 21 | 23,0 | 31 | 32 | 12 | 12 |
XDWM NW 13 HS VA | S | PN 100 | 16 | M 22 x 1.5 | 27 | 14 | 46 | 23 | 22,5 | 31 | 36 | 14 | 14 |
XDWM NW 16 HS VA | S | PN 100 | 20 | M 27 x 2 | 32 | 16 | 58 | 28 | 27,5 | 38 | 46 | 17 | 17 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.