VEL MG
Fitting, L shaped
Product image
![VEL MG VEL MG](/data/img/product/VEL_MG_Foto_N.jpg)
![VEL MG - data/img/product/VEL_MEx.gif data/img/product/VEL_MEx.gif - VEL MG](/data/img/product/VEL_MEx.gif)
Properties
Connection 1 |
metric nut thread |
Sealing form 1 |
Pipe socket, pre-assembled |
Connection 2 + 3 |
metric cylindrical outer thread |
Sealing form 2 + 3 |
24° inner cone |
Design |
Adjustable direction fitting |
Construction |
L shaped |
Standard |
DIN 2353 ISO 8434-1 |
Scope of supply |
Socket with union nut and cutting ring |
Material |
Brass |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Series | Operating pressure | Ø d2 (mm) |
G1 | L1 (mm) |
L2 (mm) |
L3 (mm) |
AF (mm) |
S1 |
---|---|---|---|---|---|---|---|---|---|
VEL NW 04 HL MG | L | PN 200 | 6 | M 12 x 1.5 | 27 | 12,0 | 26,0 | 12 | 14 |
VEL NW 06 HL MG | L | PN 200 | 8 | M 14 x 1.5 | 29 | 14,0 | 27,0 | 12 | 17 |
VEL NW 08 HL MG | L | PN 200 | 10 | M 16 x 1.5 | 30 | 15,0 | 28,5 | 14 | 19 |
VEL NW 10 HL MG | L | PN 200 | 12 | M 18 x 1.5 | 32 | 17,0 | 29,0 | 17 | 22 |
VEL NW 13 HL MG | L | PN 200 | 15 | M 22 x 1.5 | 36 | 21,0 | 32,0 | 19 | 27 |
VEL NW 16 HL MG | L | PN 200 | 18 | M 26 x 1.5 | 40 | 23,5 | 35,0 | 24 | 32 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.