SIH 100 - SIH 700
Swage ferrule for SI + textile hoseProduct image
Properties
Ferrule type |
Non-skive ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN* | Size | Inches | D1 (mm) |
D2 (mm) |
D3 (mm) |
LF (mm) |
---|---|---|---|---|---|---|---|
SIH 103 | 3 | 2 | - | 11,3 | 10,0 | 6,5 | 17 |
SIH 104 | 4 | 3 | 3/16" | 13,2 | 12,0 | 7,5 | 20 |
SIH 106 | 6 | 4 | 1/4" | 14,8 | 13,5 | 10,0 | 20 |
SIH 108 | 8 | 5 | 5/16" | 17,0 | 16,0 | 11,7 | 20 |
SIH 110 | 10 | 6 | 3/8" | 20,6 | 19,0 | 13,8 | 26 |
SIH 113 | 12 | 8 | 1/2" | 26,5 | 24,5 | 17,0 | 33 |
SIH 116 | 16 | 10 | 5/8" | 30,0 | 28,0 | 20,5 | 34 |
SIH 204 | 4 | 3 | 3/16" | 13,2 | 12,0 | 7,5 | 17 |
SIH 206 | 6 | 4 | 1/4" | 14,8 | 13,5 | 10,0 | 20 |
SIH 304 | 4 | 3 | 3/16" | 14,6 | 13,5 | 7,5 | 20 |
SIH 306 | 6 | 4 | 1/4" | 16,3 | 15,0 | 10,0 | 20 |
SIH 308 | 8 | 5 | 5/16" | 18,5 | 17,0 | 11,7 | 21 |
SIH 310 | 10 | 6 | 3/8" | 23,9 | 22,0 | 15,6 | 32 |
SIH 404 | 4 | 3 | 3/16" | 14,6 | 13,5 | 7,5 | 20 |
SIH 408 | 8 | 5 | 5/16" | 19,6 | 18,0 | 13,8 | 21 |
SIH 413 | 12 | 8 | 1/2" | 28,3 | 26,5 | 19,5 | 33 |
SIH 504 | 4 | 3 | 3/16" | 10,3 | 10,3 | 5,5 | 17 |
SIH 510 | 10 | 6 | 3/8" | 16,1 | 15,0 | 11,7 | 20 |
SIH 513 | 12 | 8 | 1/2" | 19,6 | 18,0 | 13,8 | 21 |
SIH 605 | 4 | 3 | 3/16" | 12,1 | 11,0 | 6,5 | 17 |
SIH 606 | 6 | 4 | 1/4" | 14,6 | 13,5 | 7,5 | 20 |
SIH 706 | 6 | 4 | 1/4" | 16,4 | 15,0 | 7,5 | 20 |
SIH 713 | 12 | 8 | 1/2" | 25,0 | 23,0 | 17,0 | 32 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.