Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SKM HL FS
Plug-in coupling sleeve
Product image
Properties
| Application |
General application, e.g. in industry, construction machinery, agricultural technology etc. |
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
24° inner cone |
| compatible with |
Stucchi |
| Material |
Steel |
| Surface |
electro galvanised |
Description
Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.
Note
With standard threaded connections in determining the operating pressure of the maximum rated pressure is taken into account.
Interchangeable with couplings to ISO 16028.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Series | for external pipe Ø (mm) |
Connecting thread | Size | Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
|---|---|---|---|---|---|---|---|---|---|
| SKM 08 HL 2 FS | 8 | L | 10 | M 16x1,5 | 2 | 350,0 | 4,0 | -20 | 100 |
| SKM 10 HL 2 FS | 10 | L | 12 | M 18x1,5 | 2 | 350,0 | 4,0 | -20 | 100 |
| SKM 10 HL 3 FS | 10 | L | 12 | M 18x1,5 | 3 | 350,0 | 4,0 | -20 | 100 |
| SKM 13 HL 2 FS | 12 | L | 15 | M 22x1,5 | 2 | 350,0 | 4,0 | -20 | 100 |
| SKM 13 HL 3 FS | 12 | L | 15 | M 22x1,5 | 3 | 350,0 | 4,0 | -20 | 100 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Ordering information
Other pressure and temperature figures available on request.
Accessories
- SKM ZUBS FS
- Dust protection coupling sleeve, SKM..FS
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.