Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SKM IN FS
Plug-in coupling boot, flat sealing
Product image
Properties
| Application |
General application, e.g. in industry, construction machinery, agricultural technology etc. |
| Design |
flat sealing |
| Connection 1 |
NPT internal thread |
| compatible with |
Stucchi |
| Material |
Steel |
| Surface |
electro galvanised |
Description
Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.
Note
Interchangeable with couplings to ISO 16028.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Connecting thread | Size | Operating pressure (bar) |
Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
|---|---|---|---|---|---|---|
| SKM 10 IN 2 FS | 10 | NPT 3/8" -18 | 2 | 350,0 | -25 | 100 |
| SKM 13 IN 2 FS | 12 | NPT 1/2" -14 | 2 | 350,0 | -25 | 100 |
| SKM 13 IN 3 FS | 12 | NPT 1/2" -14 | 3 | 350,0 | -25 | 100 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Ordering information
Other pressure and temperature figures available on request.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.