SKM IR FS
Plug-in coupling sleeveProduct image
Properties
Application |
General application, e.g. in industry, construction machinery, agricultural technology etc. |
Design |
flat sealing |
Connection 1 |
BSP cylindrical internal threads |
Sealing form 1 |
for screw-in pins with shapes A, B and if necessary E |
compatible with |
Stucchi |
Material |
Steel |
Surface |
electro galvanised |
Description
Flat seal plug-in coupling for minimal oil leakages and air admittance when coupling.
For a high flow with minimal pressure loss.
Suitable for use in environmentally sensitive areas.
Note
Interchangeable with couplings to ISO 16028.
Item
Sort upwards
Sort downwards
Identification | DN* | Connecting thread | Size | Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
---|---|---|---|---|---|---|---|
SKM 06 IR 1 FS | 6 | G 1/4" -19 | 1 | 400,0 | 4 | -20 | 100 |
SKM 10 IR 2 FS | 10 | G 3/8" -19 | 2 | 350,0 | 4 | -20 | 100 |
SKM 13 IR 2 FS | 12 | G 1/2" -14 | 2 | 350,0 | 4 | -20 | 100 |
SKM 13 IR 3 FS | 12 | G 1/2" -14 | 3 | 350,0 | 4 | -20 | 100 |
SKM 20 IR 3 FS | 19 | G 3/4" -14 | 3 | 350,0 | 4 | -20 | 100 |
SKM 20 IR 4 FS | 19 | G 3/4" -14 | 4 | 350,0 | 4 | -20 | 100 |
SKM 25 IR 5 FS | 25 | G 1" -11 | 5 | 350,0 | 4 | -20 | 100 |
SKM 32 IR 6 FS | 31 | G 1.1/4" -11 | 6 | 300,0 | 4 | -20 | 100 |
SKM 40 IR 7 FS | 38 | G 1.1/2" -11 | 7 | 200,0 | 4 | -20 | 100 |
SKM 50 IR 8 FS | 51 | G 2" -11 | 8 | 200,0 | 4 | -20 | 100 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Ordering information
Other pressure and temperature figures available on request.
Accessories
- SKM ZUBS FS
- Dust protection coupling sleeve, SKM..FS
Product versions
This product is also available in the following designs:
- SKM IR FS VA
- Plug-in coupling sleeve, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.