Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DR
Ice scraper DR
Product image
Properties
| Design |
Wipers |
| Sliding speed max. |
1,0 m/s |
| Temp. min. |
-40 °C |
| Temp. max. |
120 °C |
| Media |
Mineral oils Water-air |
| Installation |
is pressed into an open groove |
| Material |
(1) Metallic wiper lip: brass (INOX optional) (2) Elastomer wiper lip: NBR (FPM optional) (3) Sleeve: steel (INOX optional) (4) Distance pieces: steel (INOX optional) |
| Application |
Hydraulics |
Description
Low spatial requirement.
Effective wiping under extreme conditions.
Suitable for ice, sludge and especially sticky particles.
The floating metallic wiper lip allows the rods to be offset.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
H (mm) |
|---|---|---|---|---|
| DR 14 | 14 | 27 | 7,0 | 6,5 |
| DR 16 | 16 | 29 | 7,0 | 6,5 |
| DR 20 | 20 | 33 | 7,0 | 6,5 |
| DR 22 | 22 | 35 | 7,0 | 6,5 |
| DR 25 | 25 | 38 | 7,0 | 6,5 |
| DR 28 | 28 | 41 | 7,0 | 6,5 |
| DR 28 SS-FKM-SS | 28 | 41 | 7,0 | 6,5 |
| DR 30 | 30 | 43 | 7,5 | 7,0 |
| DR 35 | 35 | 48 | 7,5 | 7,0 |
| DR 36 | 36 | 49 | 7,5 | 7,0 |
| DR 38 | 38 | 51 | 7,5 | 7,0 |
| DR 40 | 40 | 53 | 7,5 | 7,0 |
| DR 45 | 45 | 58 | 7,5 | 7,0 |
| DR 50 | 50 | 64 | 8,0 | 7,5 |
| DR 50-R-9975-R | 50 | 64 | 8,0 | 7,5 |
| DR 55 | 55 | 69 | 8,0 | 7,5 |
| DR 60 | 60 | 74 | 8,0 | 7,5 |
| DR 70 | 70 | 84 | 8,0 | 7,5 |
| DR 75 | 75 | 89 | 8,0 | 7,5 |
| DR 80 | 80 | 96 | 8,5 | 8,0 |
| DR80 - SS-FKM-SS | 80 | 96 | 8,5 | 8,0 |
| DR 90 | 90 | 106 | 8,5 | 8,0 |
| DR 150 | 150 | 170 | 9,0 | 8,5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.