Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TE 200 RAIL (2TE)
Low pressure hose with textile insert RAIL
Product image
Properties
| Application |
Rail vehicles |
| Standard |
EN 854 2 TE EN 45545-2 |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
one or two textile braided inserts |
| Outer layer |
oil-resistant, synthetic rubber; flame retardant |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Temp. range |
Air ( max. 75 °C ) |
| Media |
Mineral oil Glycol Water (0°C to + 85°C) |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|
| TE 204 RAIL | 5 | 3 | 3/16" | 4,8 | 12,6 | 80,0 | 160 | 320 | 35 |
| TE 206 RAIL | 6 | 4 | 1/4" | 6,4 | 14,2 | 75,0 | 150 | 300 | 40 |
| TE 208 RAIL | 8 | 5 | 5/16" | 7,9 | 15,7 | 68,0 | 136 | 270 | 50 |
| TE 210 RAIL | 10 | 6 | 3/8" | 9,5 | 17,3 | 63,0 | 126 | 250 | 60 |
| TE 213 RAIL | 12 | 8 | 1/2" | 12,7 | 20,7 | 58,0 | 116 | 230 | 70 |
| TE 216 RAIL | 16 | 10 | 5/8" | 15,9 | 24,9 | 50,0 | 100 | 200 | 90 |
| TE 220 RAIL | 19 | 12 | 3/4" | 19,0 | 28,0 | 45,0 | 90 | 180 | 110 |
| TE 225 RAIL | 25 | 16 | 1" | 25,4 | 35,9 | 40,0 | 80 | 160 | 150 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.