Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TKM MV H 45
Temperature control coupling sleeve with valve, angle 45°
Product image
Properties
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
60° inner cone |
| Material |
Brass |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Connecting thread | Connector dimension (mm) |
Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
AF (mm) |
|---|---|---|---|---|---|---|---|---|
| TKM 09 MV 02 H 45 | 2 | M 10x1 | 9 | 15,0 | 3 | -15 | 150 | 17 |
| TKM 09 MV 06 H 45 | 6 | M 14x1,5 | 9 | 15,0 | 3 | -15 | 150 | 17 |
| TKM 13 MV 08 H 45 | 8 | M 16x1,5 | 13 | 15,0 | 3 | -15 | 150 | 22 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled – AF = Width across flats
Ordering information
Other pressure and temperature figures available on request.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.