TKM OV MM ND
Temperature control coupling sleeve without valveProduct image
Properties
Connection 1 |
Hose connection |
O-ring |
Viton, PTFE coated |
Material |
Brass |
Item
Sort upwards
Sort downwards
Identification | DN* | Hose connection (mm) |
Connector dimension (mm) |
Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
---|---|---|---|---|---|---|---|
TKM 09 OV 06 MM ND | 6 | 6 | 9 | 15,0 | 3 | -15 | 150 |
TKM 09 OV 10 MM ND | 10 | 10 | 9 | 15,0 | 3 | -15 | 150 |
TKM 13 OV 10 MM ND | 10 | 10 | 13 | 15,0 | 3 | -15 | 150 |
TKM 13 OV 13 MM ND | 12 | 13 | 13 | 15,0 | 3 | -15 | 150 |
TKM 19 OV 16 MM ND | 16 | 16 | 19 | 15,0 | 3 | -15 | 150 |
TKM 19 OV 19 MM ND | 19 | 19 | 19 | 15,0 | 3 | -15 | 150 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Ordering information
Other pressure and temperature figures available on request.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.