TRPE WR
Polyethylene hoseProduct image
Properties
Application |
Control lines in hydraulics and pneumatics tank and equipment manufacture laboratory technology |
Special features |
resistant to temperature and weatherproof low weight |
Inner layer |
Polyethylene |
Insert |
none |
Outer layer |
Polyethylene |
Colour |
red |
Temp. min. |
-10 °C |
Temp. max. |
60 °C |
Media |
Mineral oil Grease Propellants resistant against aqueous acids, alkalis and salts and a variety of solvents |
Note
From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °C
Factor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57
Item
Sort upwards
Sort downwards
Identification | Internal Ø (mm) |
External Ø (mm) |
Wall thickness (mm) |
BD* at 20 °C (bar) |
Min. bending radius (mm) |
---|---|---|---|---|---|
TRPE 04-0.5 WR | 3,0 | 4 | 0,50 | 9 | 20 |
TRPE 04-0.65 WR | 2,7 | 4 | 0,65 | 13 | 20 |
TRPE 04-1 WR | 2,0 | 4 | 1,00 | 20 | 20 |
TRPE 05-1 WR | 3,0 | 5 | 1,00 | 15 | 25 |
TRPE 06-1 WR | 4,0 | 6 | 1,00 | 13 | 30 |
TRPE 08-1 WR | 6,0 | 8 | 1,00 | 8 | 40 |
TRPE 08-1.5 WR | 5,0 | 8 | 1,50 | 13 | 40 |
TRPE 10-1 WR | 8,0 | 10 | 1,00 | 6 | 60 |
TRPE 10-1.5 WR | 7,0 | 10 | 1,50 | 10 | 50 |
TRPE 10-2 WR | 6,0 | 10 | 2,00 | 15 | 50 |
TRPE 12-1 WR | 10,0 | 12 | 1,00 | 5 | 85 |
TRPE 12-1.5 WR | 9,0 | 12 | 1,50 | 9 | 60 |
TRPE 12-2 WR | 8,0 | 12 | 2,00 | 12 | 60 |
TRPE 14-1.5 WR | 11,0 | 14 | 1,50 | 8 | 80 |
TRPE 14-2 WR | 10,0 | 14 | 2,00 | 9 | 80 |
TRPE 15-1.5 WR | 12,0 | 15 | 1,50 | 7 | 90 |
TRPE 16-2 WR | 12,0 | 16 | 2,00 | 8 | 120 |
TRPE 18-2 WR | 14,0 | 18 | 2,00 | 7 | 120 |
TRPE 20-2 WR | 16,0 | 20 | 2,00 | 6 | 120 |
TRPE 22-2 WR | 18,0 | 22 | 2,00 | 5 | 150 |
TRPE 25-2.5 WR | 20,0 | 25 | 2,50 | 6 | 150 |
TRPE 30-2.5 WR | 25,0 | 30 | 2,50 | 5 | 260 |
BD = Working pressure
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.