TRPU GE
Polyurethane hoseProduct image
Properties
Special features |
Hardness: 95-98° Shore A very good cold flexibility high abrasion resistance |
Inner layer |
Polyurethane |
Insert |
none |
Outer layer |
Polyurethane |
Colour |
yellow |
Temp. min. |
-40 °C |
Temp. max. |
60 °C |
Media |
aging resistant in oxygen and ozone resistant to aliphatic hydrocarbons and most lubricating oils resistant to hydrolysis and microbes |
Note
From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °C
Factor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57
Item
Sort upwards
Sort downwards
Identification | Internal Ø (mm) |
External Ø (mm) |
Wall thickness (mm) |
BD* at 20 °C (bar) |
Min. bending radius (mm) |
---|---|---|---|---|---|
TRPU 04-0.65 GE | 2,7 | 4 | 0,65 | 8 | 20 |
TRPU 04-1 GE | 2,0 | 4 | 1,00 | 14 | 20 |
TRPU 05-1 GE | 3,0 | 5 | 1,00 | 17 | 20 |
TRPU 06-1 GE | 4,0 | 6 | 1,00 | 14 | 30 |
TRPU 08-1 GE | 6,0 | 8 | 1,00 | 10 | 35 |
TRPU 08-1.25 GE | 5,5 | 8 | 1,25 | 13 | 30 |
TRPU 10-1 GE | 8,0 | 10 | 1,00 | 7 | 50 |
TRPU 10-1.25 GE | 7,5 | 10 | 1,25 | 10 | 40 |
BD = Working pressure
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.