Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
UNI-MESSSCHIEBER
Universal Vernier callipers
Product image
Properties
| Design |
Monitor with three display possibilities |
| Measurable dimensions |
Inside and outside diameter, groove depth, groove width |
Description
For an exact description of seals, information is generally required on the metallic installation space. The required measuring instruments are normally only suitable for one application.
This vernier caliper gauge, on the other hand, can be universally used for measurements on seal housings, pistons and rods. It can determine the exact depth and width of inside and outside grooves. It is thus an ideal measuring tool for repair and maintenance workshops.
Item
Sort upwards
Sort downwards
 Identification |
Measuring range | Inside measurement | Groove width inside | Groove depth inside |
|---|---|---|---|---|
| UNI-MESSSCHIEBER | 0 - 200 mm / 0 - 8" | above 20 mm | above 3 mm | up to 20 mm / 3/4" |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.