Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
VSH MG
Reinforcing sleeve for pipes
Product image
Properties
| Design |
Support bushes |
| Material |
Brass |
Item
Sort upwards
Sort downwards
 Identification |
for internal pipe Ø (mm) |
Ø D1 (mm) |
Ø d2 (mm) |
L1 (mm) |
|---|---|---|---|---|
| VSH 04 ID MG | 4,0 | 3,8 | 2,6 | 15,5 |
| VSH 04.5 ID MG | 4,5 | 4,3 | 3,1 | 14,0 |
| VSH 05 ID MG | 5,0 | 4,8 | 3,6 | 14,0 |
| VSH 06 ID MG | 6,0 | 5,8 | 4,6 | 15,5 |
| VSH 07 ID MG | 7,0 | 6,8 | 5,6 | 17,0 |
| VSH 08 ID MG | 8,0 | 7,8 | 6,6 | 16,5 |
| VSH 09 ID MG | 9,0 | 8,8 | 7,6 | 16,5 |
| VSH 10 ID MG | 10,0 | 9,8 | 8,6 | 16,5 |
| VSH 11 ID MG | 11,0 | 10,8 | 9,6 | 15,5 |
| VSH 12 ID MG | 12,0 | 11,8 | 10,2 | 17,0 |
| VSH 13 ID MG | 13,0 | 12,8 | 11,2 | 17,0 |
| VSH 14 ID MG | 14,0 | 13,8 | 12,2 | 17,0 |
| VSH 15 ID MG | 15,0 | 14,8 | 13,2 | 17,5 |
| VSH 16 ID MG | 16,0 | 15,8 | 14,2 | 17,5 |
| VSH 17 ID MG | 17,0 | 16,8 | 15,2 | 18,0 |
| VSH 18 ID MG | 18,0 | 17,8 | 16,2 | 22,0 |
| VSH 19 ID MG | 19,0 | 18,8 | 17,2 | 18,0 |
| VSH 20 ID MG | 20,0 | 19,8 | 18,2 | 18,0 |
| VSH 21 ID MG | 21,0 | 20,8 | 19,2 | 20,0 |
| VSH 22 ID MG | 22,0 | 21,8 | 20,2 | 23,5 |
| VSH 24 ID MG | 24,0 | 23,8 | 22,2 | 18,0 |
| VSH 25 ID MG | 25,0 | 24,8 | 23,2 | 18,0 |
| VSH 26 ID MG | 26,0 | 25,8 | 24,2 | 21,0 |
| VSH 31 ID MG | 31,0 | 30,8 | 28,8 | 22,5 |
| VSH 32 ID MG | 32,0 | 31,8 | 29,2 | 22,5 |
| VSH 38 ID MG | 38,0 | 37,8 | 35,8 | 23,5 |
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.