Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
XS AK 534
Moulded seals XS AK 534
Product image
Properties
| Design |
Sealing ring |
| Operating pressure |
up to 500 bar |
| Temp. range |
PU18: -30 °C bis +100 °C PU33: -40 °C bis + 120 °C |
Description
O-ring grooves according to ISO standards may be manufactured in a wide range of dimensions. For sections of 3.53 mm, the groove depth varies according to ISO 2.7 to 3.1 mm. For the best possible seal in all dimension ranges this seal has been developed that can replace conventional O-rings.
Interchangeable with O-rings
High resistance to extrusion.
no anti-extrusion ring required
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
g (mm) |
L (mm) |
cross section (mm) |
Material |
|---|---|---|---|---|---|
| XS 80 - AK 534 | 80 to 84.9 mm | 4.3 to 4.7 mm | 5,34 | PU33 | |
| XS 85 - AK 534 | 85 to 89.9 mm | 4.3 to 4.7 mm | 5,34 | PU33 | |
| XS 90 - AK 534 | 90 to 94.9 mm | 4.3 to 4.7 mm | 5,34 | PU33 | |
| XS 95 - AK 534 | 95 to 99.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 100 - AK 534 | 100 to 104.9 mm | 4.3 to 4.7 mm | 5,34 | PU33 | |
| XS 105 - AK 534 | 105 to 109.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 110 - AK 534 | 110 to 114.9 mm | 4.3 to 4.7 mm | 5,34 | PU33 | |
| XS 115 - AK 534 | 115 to 119.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 120 - AK 534 | 120 to 124.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 125 - AK 534 | 125 to 129.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 130 - AK 534 | 130 to 135.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 136 - AK 534 | 136 to 142.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 143 - AK 534 | 143 to 149.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 150 - AK 534 | 150 to 157.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 158 - AK 534 | 158 to 165.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 166 - AK 534 | 166 to 173.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 174 - AK 534 | 174 to 181.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 182 - AK 534 | 182 to 189.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 190 - AK 534 | 190 to 199.9 mm | 4.3 to 4.7 mm | 5,34 | PU18 | |
| XS 200 - AK 534 | 200 to 210 mm | 4.3 to 4.7 mm | 5,34 | PU18 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.