Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
XWMK
Screw-in fitting, angle 90°
Product image
Properties
| Connection 1 |
metric conical outer thread |
| Sealing form 1 |
thread seal |
| Connection 2 |
metric cylindrical outer thread |
| Sealing form 2 |
24° inner cone |
| Design |
Screw-in fitting |
| Construction |
Angle 90° |
| Standard |
DIN 2353 ISO 8434-1 |
| Scope of supply |
Socket (without union nut and cutting ring) |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Operating pressure | Ø d2 (mm) |
G | i (mm) |
L4 (mm) |
L5 (mm) |
L7 (mm) |
AF (mm) |
|---|---|---|---|---|---|---|---|---|---|
| XWM 04 LL | LL | PN 100 | 4 | M 8 x 1 K | 8,0 | 11,0 | 17 | 15 | 9 |
| XWM 04 LL 6 | LL | PN 100 | 4 | M 6 x 1 K | 8,0 | 11,0 | 17 | 15 | 9 |
| XWM 05 LL | LL | PN 100 | 5 | M 8 x 1 K | 8,0 | 9,5 | 17 | 15 | 9 |
| XWM 06 LL 6 | LL | PN 100 | 6 | M 6 x 1 K | 7,0 | 9,5 | 17 | 15 | 9 |
| XWM 06 LL 8 | LL | PN 100 | 6 | M 8 x 1 K | 8,0 | 9,5 | 17 | 15 | 9 |
| XWM 06 LL | LL | PN 100 | 6 | M 10 x 1 K | 9,0 | 9,5 | 17 | 15 | 9 |
| XWM 08 LL | LL | PN 100 | 8 | M 10 x 1 K | 10,0 | 11,5 | 20 | 17 | 12 |
| XWM NW 04 HL | L | PN 315 | 6 | M 10 x 1 K | 8,0 | 12,0 | 20 | 19 | 12 |
| XWM NW 04 HL 12 | L | PN 315 | 6 | M 12 x 1.5 K | 12,0 | 12,0 | 22 | 19 | 12 |
| XWM NW 06 HL | L | PN 315 | 8 | M 12 x 1.5 K | 12,0 | 14,0 | 26 | 21 | 12 |
| XWM NW 08 HL | L | PN 315 | 10 | M 14 x 1.5 K | 11,5 | 15,0 | 27 | 22 | 14 |
| XWM NW 08 HL 16 | L | PN 315 | 10 | M 16 x 1.5 K | 11,5 | 15,0 | 28 | 22 | 14 |
| XWM NW 10 HL | L | PN 315 | 12 | M 16 x 1.5 K | 11,5 | 17,0 | 28 | 24 | 17 |
| XWM NW 13 HL | L | PN 315 | 15 | M 18 x 1.5 K | 13,5 | 21,0 | 32 | 28 | 19 |
| XWM NW 16 HL | L | PN 315 | 18 | M 22 x 1.5 K | 15,0 | 23,5 | 36 | 31 | 24 |
| XWM NW 03 HS | S | PN 400 | 6 | M 12 x 1.5 K | 12,0 | 16,0 | 26 | 23 | 12 |
| XWM NW 04 HS | S | PN 400 | 8 | M 14 x 1.5 K | 12,0 | 17,0 | 27 | 24 | 14 |
| XWM NW 06 HS | S | PN 400 | 10 | M 16 x 1.5 K | 12,0 | 17,5 | 28 | 25 | 17 |
| XWM NW 08 HS | S | PN 400 | 12 | M 18 x 1.5 K | 12,0 | 21,5 | 28 | 29 | 17 |
| XWM NW 10 HS | S | PN 400 | 14 | M 20 x 1.5 K | 14,0 | 22,0 | 32 | 30 | 19 |
| XWM NW 13 HS | S | PN 400 | 16 | M 22 x 1.5 K | 14,0 | 24,5 | 32 | 33 | 24 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.