K-DRG MEMBRAN O SEKUNDAERL MANO MS
Pressure regulators for Water with pressure gaugeToote pilt
Omadused
Sisendrõhk |
Max. 40 bar |
Temperatuuri ulatus |
+5 °C to +90 °C |
Tihendusmaterjal |
NBR |
Korpus |
Brass |
Käsiratas |
Plastic (G 1/4, G 1/2), rotary switch (G 3/4, G 1) |
Membraan |
NBR |
Läbivoolu väärtuse mõõtmine |
At P1 = 7 bar, P2 = 6 bar and ∆p = 1 bar |
Kirjeldus
Brass diaphragm pressure regulators with non-self-relieving design, specially for use with water. The regulator protects water installations against high system pressure, prevents pressure fluctuations and helps reduce water consumption. Undesirable flow noises are kept to a minimum.
Vihje
Lisaandmed saate soovi korral.
Artikkel
Alustada sorteerimist ülalt
Alustada sorteerimist altpoolt
Märgistus | Keere | Reguleerimisvahemik | Läbivool (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
---|---|---|---|---|---|---|---|
K- 07 25 04 78 | G 1/4 | 0.5 - 6 bar | 3 | 45,0 | 104,0 mm | 23,0 | 81,0 |
K- 07 25 04 79 | G 1/4 | 0.5 - 10 bar | 3 | 45,0 | 104,0 mm | 23,0 | 81,0 |
K- 07 25 04 80 | G 1/2 | 0.5 - 6 bar | 15 | 72,0 | 153,0 mm | 30,0 | 123,0 |
K- 07 25 04 81 | G 1/2 | 0.5 - 10 bar | 15 | 72,0 | 153,0 mm | 30,0 | 123,0 |
K- 07 25 04 82 | G 1 | 0.5 - 6 bar | 24 | 114,0 | 216,0 mm | 41,0 | 175,0 |
K- 07 25 04 83 | G 1 | 0.5 - 10 bar | 24 | 114,0 | 216,0 mm | 41,0 | 175,0 |
K- 07 25 04 84 | G 1 1/2 | 0.5 - 6 bar | 56 | 114,0 | 233,0 mm | 50,0 | 183,0 |
K- 07 25 04 85 | G 1 1/2 | 0.5 - 10 bar | 56 | 114,0 | 233,0 mm | 50,0 | 183,0 |
Varuosad
- K-HALTERBAUSATZ
- Holder
- K-MEMBRANE DICHTKEGEL
- Sealing cone, complete
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Tingimused
Vaatamata põhjalikule kontrollile ei saa me vigade esinemist välistada ning ei vastuta olemasolevate andmete eest.
Kõik andmed meie Interneti-kataloogis põhinevad hetkel kehtivatel normidel ja kutseliidu eeskirjadel. Ainult meie ettenähtud montaažieeskirjadest kinnipidamine garanteerib teile tootekindluse. Kõikide äratoodud eeskirjade mittetäitmine võib toote töökindlust kahandada ning lõpetada meie garantii kehtivuse. Meie garantii kehtib igal juhul vaid HANSA-FLEXi toodetele. Meie tooteid arendatakse pidevalt edasi, mistõttu on tehnilised muudatused võimalikud.