Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Kineski (汉语)
Latvijski (Latviešu)
Litavski (Lietuvių k.)
Mađarski (Magyar)
Nizozemski (Nederlands)
Njemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunjski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Srpski (Српска)
Talijanski (Italiano)
Turski (Türkçe)
Češki (Čeština)
Španjolski (Español)
K-DRUCKVERST VBA
Booster Regulator, VBA
Slika proizvoda
Karakteristike
| min. pogonski tlak |
0.20 MPa |
| Priključak za manometar, pneumatski |
Rc 1/8 |
| Broj priključaka za pneumatski manometar |
2 |
| maks. ulazni tlak |
0,1 to 1,0 MPa |
| Temperatura medija |
+2 °C to +50 °C |
| Okolna temperatura |
+2 °C bis +50 °C |
| Mediji |
komprimirani zrak |
| Drugi podatci |
increases the pressure only where the force is insufficient due to low factory pressure (measure to save energy) no power supply required extended life: doubled compared to the conventional model improved reliability through built-in strainer on (IN terminal) Compressed air inlet reduced condensation: Venting channels directly integrated in the cylinder tube Reduced noise: 13 dB (A) |
Opis
Booster regulator, series VBA, increases pressure only where the force is inadequate because of a low network pressure (energy saving measure), no electricity supply necessary, longer service life: doubled compared to conventional model, lower operating noise level: 13 dB (A), improved operational reliability from inbuilt mesh filter on (IN connection) compressed air inlet, reduced condensation levels: air exhaust channels integrated directly into the cylinder tube, suitable for: compressed air, size 1/4, with pressure gauge and silencer, elbow, pneumatic connection: G 1/4, pneumatic connection pressure gauge: G 1/8, pneumatic connections pressure gauge: 2, flow rate 230 l/min, pressure boost 1:2, manually actuated pressure adjustment mechanism, test pressure: 3 MPa, max. operating pressure: 2 MPa, min. operating pressure: 0.2 MPa, media temperature: +2 to +50 °C, ambient temperature: +2 to +50 °C
Artikl
poredati uzlazno
poredati silazno
 Naziv |
Priključak, pneumatski | Veličina | Mehanizam za namještanje tlaka | Omjer pojačanja tlaka | Protok (L/min) |
maks. radni tlak (MPa) |
Ispitni tlak (MPa) |
|---|---|---|---|---|---|---|---|
| K- 07 60 00 06 | G 1/4 | 1/4 | manually operated | 1:2 to 1:4 | 70 | 2,00 | 3,00 |
| K- 07 60 00 01 | G 1/4 | 1/4 | manually operated | 1:2 | 230 | 2,00 | 3,00 |
| K- 07 60 00 08 | G 3/8 | 3/8 | manually operated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 12 | G 3/8 | 3/8 | pneumatically actuated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 13 | G 1/2 | 1/2 | manually operated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 14 | G 1/2 | 1/2 | pneumatically actuated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 15 | G 1/2 | 1/2 | manually operated | 1:2 | 1600 | 1,60 | 2,40 |
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.