HANSA-FLEX AG
Uporabljate Internet Explorer.
Po potrebi deaktivirajte združljivostni način, če želite uporabljati katalog v polnem obsegu.

search Iskanje

Pomoč pri iskanju

Slovenščina

Izberite jezik

Stanje: 2017-10-19

K-DRUCKVERST VBA

Booster Regulator, VBA
Slike izdelkov ne kazatiSlika izdelka
K-DRUCKVERST VBA
Lastnosti ne kazatiLastnosti
min. delovni tlak 0.20 MPa
priključek za pnevmatski manometer Rc 1/8
število priključkov za pnevmatski manometer 2
maks. vstopni tlak 0,1 to 1,0 MPa
temperatura medija +2 °C to +50 °C
temperatura okolice +2 °C bis +50 °C
Sredstva stisnjen zrak
drugi podatki increases the pressure only where the force is insufficient due to low factory pressure (measure to save energy)
no power supply required
extended life: doubled compared to the conventional model

improved reliability through built-in strainer on (IN terminal) Compressed air inlet
reduced condensation: Venting channels directly integrated in the cylinder tube
Reduced noise: 13 dB (A)
Opisa ne kazatiOpis

Booster regulator, series VBA, increases pressure only where the force is inadequate because of a low network pressure (energy saving measure), no electricity supply necessary, longer service life: doubled compared to conventional model, lower operating noise level: 13 dB (A), improved operational reliability from inbuilt mesh filter on (IN connection) compressed air inlet, reduced condensation levels: air exhaust channels integrated directly into the cylinder tube, suitable for: compressed air, size 1/4, with pressure gauge and silencer, elbow, pneumatic connection: G 1/4, pneumatic connection pressure gauge: G 1/8, pneumatic connections pressure gauge: 2, flow rate 230 l/min, pressure boost 1:2, manually actuated pressure adjustment mechanism, test pressure: 3 MPa, max. operating pressure: 2 MPa, min. operating pressure: 0.2 MPa, media temperature: +2 to +50 °C, ambient temperature: +2 to +50 °C

Tabele izdelkov ne kazatiArtikel

razvrstiti rastoče

razvrstiti padajoče

Zavrnitev odgovornosti

Kljub skrbnemu preverjanju napak ne moremo izključiti in za informacije, ki so tu navedene, ne prevzemamo nobene odgovornosti.
Vse informacije v našem spletnem katalogu temeljijo na trenutno veljavnih standardih in predpisih poklicnih združenj. Samo če se držite naših navodil za montažo, vam lahko zagotovimo varnost proizvodov. Neupoštevanje teh pravil lahko vpliva na zanesljivost izdelka in vodi do izgube naše garancije. Naša garancija v vsakem primeru velja samo za izdelke HANSA-FLEX. Naše izdelke se stalno dalje razvija, tehnične spremembe so torej možne.