K-DVST OHNE REGLER
Pressure booster without regulatorSlika proizvoda
Karakteristike
Ulazni tlak |
2 - 10 bar |
Izlazni tlak |
Max. 20 bar (regulated: max. 16 bar) |
Temperaturno područje |
-10 °C to +50 °C (40 mm bore), -10 °C to +60 °C (63 mm bore) |
Mediji |
Filtered, unlubricated or lubricated compressed air (if lubrication is used, it must be continuous) |
Brtveni materijal |
NBR |
Regulator tlaka |
With plastic body |
Kućište |
Aluminium, anodised |
Cijev |
Anodised aluminium jacket |
Montaža |
Any position, with 4 mounting holes |
P2:P1 |
2:1 |
Opis
Pressure multipliers (boosters) allow a separate compressed air store with up to double pressure to be installed for selected devices in a compressed air system without an external energy source, i.e. it is possible to work with a maximum pressure of 20 bar in a standard 10 bar system (maximum ratio 2:1). This is achieved using a double piston, which is operated by a combination of integrated check valves in such a way that the booster works automatically until the target pressure is reached in a compressed air tank and is then automatically switched off. A tank is always required to build up the pressure and store the compressed air!
Napomena
For information about calculating the filling times for different tank sizes, refer to the above-mentioned data sheet available on our website
Drugi podatci na zahtjev.
Artikl
poredati uzlazno
poredati silazno
Naziv | Priključak | Ø klipa (mm) |
H (mm) |
L (mm) |
---|---|---|---|---|
K- 07 25 08 64 | G 1/8 | 40,0 | 64,0 | 194,0 |
K- 07 25 08 66 | G 3/8 | 63,0 | 98,0 | 290,0 |
Dodatne informacije
Pribor
- K-ZUBEH ERSATZ LUFT BOOSTER
- Accessories / spare parts for Air-air-multiplicator (booster)
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.