Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Kineski (汉语)
Latvijski (Latviešu)
Litavski (Lietuvių k.)
Mađarski (Magyar)
Nizozemski (Nederlands)
Njemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunjski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Srpski (Српска)
Talijanski (Italiano)
Turski (Türkçe)
Češki (Čeština)
Španjolski (Español)
K-RUNDZYLINDER EINF DL O D MSI
Round cylinders, single-acting (pressureless in the retracted position), with magnet, non-cushioned, »MSI« Series
Slika proizvoda
Karakteristike
| Mediji |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Radni tlak |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
| Temperaturno područje |
-20 °C to +70 °C |
| Klipnjača |
Stainless steel 1.4301 |
| Izvedba |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
| Klip |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
| Brtveni materijal |
NBR |
| Cilindrična cijev |
Stainless steel 1.4301 |
Opis
Series "MSI" single-acting, pressureless retraction, Ø 8 - 40
Napomena
Drugi podatci na zahtjev.
Artikl
poredati uzlazno
poredati silazno
 Naziv |
Ø klipa | Hod (mm) |
Izvedba | Ø klipnjače (mm) |
Vanjski navoj klipnjače |
|---|---|---|---|---|---|
| K- 07 15 19 46 | 8 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 47 | 8 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 48 | 8 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 49 | 8 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 50 | 8 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 51 | 8 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 52 | 8 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 53 | 10 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 54 | 10 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 55 | 10 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 56 | 10 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 57 | 10 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 58 | 10 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 59 | 10 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 60 | 12 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 61 | 12 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 62 | 12 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 63 | 12 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 64 | 12 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 65 | 12 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 66 | 12 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 67 | 16 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 68 | 16 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 69 | 16 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 70 | 16 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 71 | 16 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 72 | 16 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 73 | 16 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 74 | 16 mm | 60 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 75 | 16 mm | 75 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 76 | 16 mm | 80 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 77 | 16 mm | 100 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 78 | 20 mm | 10 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 79 | 20 mm | 15 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 80 | 20 mm | 20 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 81 | 20 mm | 25 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 82 | 20 mm | 30 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 83 | 20 mm | 40 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 84 | 20 mm | 50 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 85 | 20 mm | 60 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 86 | 20 mm | 75 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 87 | 20 mm | 80 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 88 | 20 mm | 100 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 89 | 20 mm | 125 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 90 | 20 mm | 150 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 91 | 25 mm | 10 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 92 | 25 mm | 15 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 93 | 25 mm | 20 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 94 | 25 mm | 25 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 95 | 25 mm | 30 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 96 | 25 mm | 40 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 97 | 25 mm | 50 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 98 | 25 mm | 60 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 99 | 25 mm | 75 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 00 | 25 mm | 80 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 01 | 25 mm | 100 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 02 | 25 mm | 125 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 03 | 25 mm | 150 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 04 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 05 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 06 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 07 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 08 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 09 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 10 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 11 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 12 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 13 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 14 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 15 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 16 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 17 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 18 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 19 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 20 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 21 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 22 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 23 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 24 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 25 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 26 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 27 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 28 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 29 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
Pribor
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.