Izvēlieties valodu
Angļu (English)
Bulgāru (Български)
Franču (Français)
Holandiešu (Nederlands)
Horvātu (Hrvatski)
Igauņu (Eesti)
Itāliešu (Italiano)
Krievu (Русский)
Lietuviešu (Lietuvių k.)
Portugāļu (Português)
Poļu (Polski)
Rumāņu (Română)
Serbu (Српска)
Slovāku (Slovenčina)
Slovēņu (Slovenščina)
Spāņu (Español)
Turku (Türkçe)
Ungāru (Magyar)
Vācu (Deutsch)
Čehu (Čeština)
Ķīniešu (汉语)
K-RUNDZYLINDER EINF DL O D MSI
Round cylinders, single-acting (pressureless in the retracted position), with magnet, non-cushioned, »MSI« Series
Izstrādājuma attēls
Īpašības
| Darba vides |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Darba spiediens |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
| Temperatūras diapazons |
-20 °C to +70 °C |
| Virzuļkāts |
Stainless steel 1.4301 |
| Modelis |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
| Virzulis |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
| Blīvēšanas materiāls |
NBR |
| Cilindra caurule |
Stainless steel 1.4301 |
Apraksts
Series "MSI" single-acting, pressureless retraction, Ø 8 - 40
Norāde
Citi dati pieejami pēc pieprasījuma.
Izstrādājums
šķirot dilstošā secībā
šķirot pieaugošā secībā
 Apzīmējums |
Ø virzulim | Gājiens (mm) |
Modelis | Ø virzuļkātam (mm) |
Virzuļkāta ārējā vītne |
|---|---|---|---|---|---|
| K- 07 15 19 46 | 8 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 47 | 8 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 48 | 8 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 49 | 8 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 50 | 8 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 51 | 8 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 52 | 8 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 53 | 10 mm | 10 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 54 | 10 mm | 15 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 55 | 10 mm | 20 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 56 | 10 mm | 25 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 57 | 10 mm | 30 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 58 | 10 mm | 40 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 59 | 10 mm | 50 | »CA« type | 4 | M 4 x 0.7 |
| K- 07 15 19 60 | 12 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 61 | 12 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 62 | 12 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 63 | 12 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 64 | 12 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 65 | 12 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 66 | 12 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 67 | 16 mm | 10 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 68 | 16 mm | 15 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 69 | 16 mm | 20 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 70 | 16 mm | 25 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 71 | 16 mm | 30 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 72 | 16 mm | 40 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 73 | 16 mm | 50 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 74 | 16 mm | 60 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 75 | 16 mm | 75 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 76 | 16 mm | 80 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 77 | 16 mm | 100 | »CA« type | 6 | M 6 x 1 |
| K- 07 15 19 78 | 20 mm | 10 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 79 | 20 mm | 15 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 80 | 20 mm | 20 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 81 | 20 mm | 25 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 82 | 20 mm | 30 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 83 | 20 mm | 40 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 84 | 20 mm | 50 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 85 | 20 mm | 60 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 86 | 20 mm | 75 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 87 | 20 mm | 80 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 88 | 20 mm | 100 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 89 | 20 mm | 125 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 90 | 20 mm | 150 | »CA« type | 8 | M 8 x 1.25 |
| K- 07 15 19 91 | 25 mm | 10 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 92 | 25 mm | 15 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 93 | 25 mm | 20 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 94 | 25 mm | 25 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 95 | 25 mm | 30 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 96 | 25 mm | 40 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 97 | 25 mm | 50 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 98 | 25 mm | 60 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 19 99 | 25 mm | 75 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 00 | 25 mm | 80 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 01 | 25 mm | 100 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 02 | 25 mm | 125 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 03 | 25 mm | 150 | »CA« type | 10 | M 10 x 1.25 |
| K- 07 15 20 04 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 05 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 06 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 07 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 08 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 09 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 10 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 11 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 12 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 13 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 14 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 15 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 16 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
| K- 07 15 20 17 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 18 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 19 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 20 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 21 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 22 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 23 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 24 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 25 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 26 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 27 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 28 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
| K- 07 15 20 29 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
Piederumi
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Saistību atruna
Neskatoties uz rūpīgu pārbaudi, mēs nevaram izslēgt kļūdas un negarantējam iekļautās informācijas pareizību.
Visa mūsu tiešsaistes katalogā iekļautā informācija balstās uz šobrīd spēkā esošajiem standartiem un profesionālo savienību noteikumiem. Tikai mūsu montāžas noteikumu ievērošana Jums garantēs izstrādājumu drošību. Visu minēto noteikumu neievērošana var negatīvi ietekmēt izstrādājuma funkcionālo drošību un būt par iemeslu mūsu garantijas zaudēšanai. Mūsu garantija jebkurā gadījumā attiecas tikai uz HANSA-FLEX izstrādājumiem. Mūsu izstrādājumi nepārtraukti tiek attīstīti, tādēļ iespējamas tehniskas izmaiņas.