Izvēlieties valodu
Angļu (English)
Bulgāru (Български)
Franču (Français)
Holandiešu (Nederlands)
Horvātu (Hrvatski)
Igauņu (Eesti)
Itāliešu (Italiano)
Krievu (Русский)
Lietuviešu (Lietuvių k.)
Portugāļu (Português)
Poļu (Polski)
Rumāņu (Română)
Serbu (Српска)
Slovāku (Slovenčina)
Slovēņu (Slovenščina)
Spāņu (Español)
Turku (Türkçe)
Ungāru (Magyar)
Vācu (Deutsch)
Čehu (Čeština)
Ķīniešu (汉语)
PR V4 (M)
Metriskā tērauda precīzijas caurule, 1.4571
Izstrādājuma attēls
Īpašības
| Modelis |
Tērauda precīzijas caurule, metriskā |
| Materiāls |
Nerūsējošais tērauds 1.4571 |
| Caurules garums |
6 metri |
Norāde
Norādītās spiediena vērtības attiecas uz taisnu cauruli.
Liektai caurulei analogi DIN EN 13480-4 jāaprēķina atbilstošais sieniņu biezums.
Izstrādājums
šķirot dilstošā secībā
šķirot pieaugošā secībā
 Apzīmējums |
Ø d2 (mm) |
AD pielaides +/- (mm) |
Ø d1 (mm) |
S (mm) |
ID pielaides +/- (mm) |
Slodzes veids I (bar) |
Slodzes veids III (bar) |
|---|---|---|---|---|---|---|---|
| PR 34-2 V4 | 34,0 | - | 30,0 | 2,00 | - | - | - |
| PR 14-1 V4 | 14,0 | - | 12,0 | 1,00 | - | - | - |
| PR 04-0.5 V4 | 4,0 | - | 3,0 | 0,50 | - | - | - |
| PR 04-1 V4 | 4,0 | 0,08 | 2,0 | 1,00 | 0,15 | 600 | 408 |
| PR 05-0.5 V4 | 5,0 | - | 4,0 | 0,50 | - | - | - |
| PR 05-1 V4 | 5,0 | - | 3,0 | 1,00 | - | - | - |
| PR 06-0.5 V4 | 6,0 | 0,08 | 5,0 | 0,50 | 0,15 | - | - |
| PR 06-1 V4 | 6,0 | 0,08 | 4,0 | 1,00 | 0,15 | 400 | 287 |
| PR 06-1.5 V4 | 6,0 | 0,08 | 3,0 | 1,50 | 0,15 | 660 | 442 |
| PR 06-2 V4 | 6,0 | 0,08 | 2,0 | 2,00 | 0,15 | 915 | 575 |
| PR 08-1 V4 | 8,0 | 0,08 | 6,0 | 1,00 | 0,15 | 300 | 222 |
| PR 08-1.5 V4 | 8,0 | 0,08 | 5,0 | 1,50 | 0,15 | 495 | 347 |
| PR 08-2 V4 | 8,0 | 0,08 | 4,0 | 2,00 | 0,15 | 690 | 458 |
| PR 08-2.5 V4 | 8,0 | - | 3,0 | 2,50 | - | - | - |
| PR 10-0.5 V4 | 10,0 | 0,08 | 9,0 | 0,50 | 0,08 | 105 | 81 |
| PR 10-1 V4 | 10,0 | 0,08 | 8,0 | 1,00 | 0,15 | 240 | 181 |
| PR 10-1.2 V4 | 10,0 | - | 7,6 | 1,20 | - | - | - |
| PR 10-1.5 V4 | 10,0 | 0,08 | 7,0 | 1,50 | 0,15 | 396 | 285 |
| PR 10-2 V4 | 10,0 | 0,08 | 6,0 | 2,00 | 0,15 | 552 | 380 |
| PR 10-2.5 V4 | 10,0 | - | 5,0 | 2,50 | - | - | - |
| PR 12-1 V4 | 12,0 | 0,08 | 10,0 | 1,00 | 0,15 | 200 | 152 |
| PR 12-1.5 V4 | 12,0 | 0,08 | 9,0 | 1,50 | 0,15 | 330 | 242 |
| PR 12-2 V4 | 12,0 | 0,08 | 8,0 | 2,00 | 0,15 | 460 | 325 |
| PR 12-3 V4 | 12,0 | 0,08 | 6,0 | 3,00 | 0,25 | 694 | 461 |
| PR 13-1 V4 | 13,0 | - | 11,0 | 1,00 | - | - | - |
| PR 14-1.5 V4 | 14,0 | 0,08 | 11,0 | 1,50 | 0,15 | 283 | 210 |
| PR 14-2 V4 | 14,0 | 0,08 | 10,0 | 2,00 | 0,15 | 394 | 284 |
| PR 14-2.5 V4 | 14,0 | 0,08 | 9,0 | 2,50 | 0,15 | 505 | 353 |
| PR 14-3 V4 | 14,0 | - | 8,0 | 3,00 | - | - | - |
| PR 15-1 V4 | 15,0 | 0,08 | 13,0 | 1,00 | 0,08 | 174 | 134 |
| PR 15-1.5 V4 | 15,0 | 0,08 | 12,0 | 1,50 | 0,15 | 264 | 197 |
| PR 15-2 V4 | 15,0 | 0,08 | 11,0 | 2,00 | 0,15 | 368 | 267 |
| PR 16-1 V 4 | 16,0 | - | 14,0 | 1,00 | - | - | - |
| PR 16-1.5 V4 | 16,0 | 0,08 | 13,0 | 1,50 | 0,08 | 261 | 195 |
| PR 16-2 V4 | 16,0 | 0,08 | 12,0 | 2,00 | 0,15 | 345 | 252 |
| PR 16-2.5 V4 | 16,0 | 0,08 | 11,0 | 2,50 | 0,15 | 442 | 314 |
| PR 16-3 V4 | 16,0 | 0,08 | 10,0 | 3,00 | 0,15 | 540 | 373 |
| PR 16-4 V4 | 16,0 | - | 8,0 | 4,00 | - | - | - |
| PR 18-1 V4 | 18,0 | 0,08 | 16,0 | 1,00 | 0,08 | 145 | 112 |
| PR 18-1.5 V4 | 18,0 | 0,08 | 15,0 | 1,50 | 0,08 | 232 | 175 |
| PR 18-2 V4 | 18,0 | 0,08 | 14,0 | 2,00 | 0,08 | 318 | 234 |
| PR 18-2.5 V4 | 18,0 | 0,08 | 13,0 | 2,50 | 0,15 | 393 | 283 |
| PR 18-3 V4 | 18,0 | - | 12,0 | 3,00 | - | - | - |
| PR 18-4 V4 | 18,0 | - | 10,0 | 4,00 | - | - | - |
| PR 20-1 V 4 | 20,0 | 0,08 | 18,0 | 1,00 | - | - | - |
| PR 20-1.5 V 4 | 20,0 | 0,08 | 17,0 | 1,50 | - | - | - |
| PR 20-2 V4 | 20,0 | 0,08 | 16,0 | 2,00 | 0,08 | 287 | 213 |
| PR 20-2.5 V4 | 20,0 | 0,08 | 15,0 | 2,50 | 0,15 | 354 | 258 |
| PR 20-3 V4 | 20,0 | 0,08 | 14,0 | 3,00 | 0,15 | 432 | 308 |
| PR 20-3.5 V4 | 20,0 | 0,08 | 13,0 | 3,50 | 0,15 | 510 | 355 |
| PR 20-4 V4 | 20,0 | - | 12,0 | 4,00 | - | - | - |
| PR 22-1 V 4 | 22,0 | 0,08 | 20,0 | 1,00 | - | - | - |
| PR 22-1.5 V4 | 22,0 | 0,08 | 19,0 | 1,50 | 0,08 | 190 | 145 |
| PR 22-2 V4 | 22,0 | 0,08 | 18,0 | 2,00 | 0,08 | 260 | 195 |
| PR 22-2.5 V4 | 22,0 | 0,08 | 17,0 | 2,50 | 0,15 | 321 | 236 |
| PR 22-3 V4 | 22,0 | 0,08 | 16,0 | 3,00 | 0,15 | 392 | 283 |
| PR 22-4 V4 | 22,0 | - | 14,0 | 4,00 | - | - | - |
| PR 22-6 V4 | 22,0 | - | 10,0 | 6,00 | - | - | - |
| PR 23-1.5 V4 | 23,0 | - | 20,0 | 1,50 | - | - | - |
| PR 24-4 V4 | 24,0 | - | 16,0 | 4,00 | - | - | - |
| PR 25-1.5 V4 | 25,0 | 0,08 | 22,0 | 1,50 | 0,08 | 167 | 128 |
| PR 25-2 V4 | 25,0 | 0,08 | 21,0 | 2,00 | 0,08 | 229 | 173 |
| PR 25-2.5 V4 | 25,0 | 0,08 | 20,0 | 2,50 | 0,08 | 292 | 216 |
| PR 25-3 V4 | 25,0 | 0,08 | 19,0 | 3,00 | 0,15 | 345 | 252 |
| PR 25-4 V4 | 25,0 | - | 17,0 | 4,00 | - | - | - |
| PR 25-5 V4 | 25,0 | - | 15,0 | 5,00 | - | - | - |
| PR 25-6 V4 | 25,0 | - | 13,0 | 6,00 | - | - | - |
| PR 28-1 V4 | 28,0 | - | 26,0 | 1,00 | - | - | - |
| PR 28-1.5 V4 | 28,0 | 0,08 | 25,0 | 1,50 | 0,08 | 149 | 115 |
| PR 28-2 V4 | 28,0 | 0,08 | 24,0 | 2,00 | 0,08 | 205 | 156 |
| PR 28-2.5 V4 | 28,0 | 0,08 | 23,0 | 2,50 | 0,08 | 260 | 195 |
| PR 28-3 V4 | 28,0 | - | 22,0 | 3,00 | - | - | - |
| PR 28-4 V4 | 28,0 | - | 20,0 | 4,00 | - | - | - |
| PR 28-5 V4 | 28,0 | - | 18,0 | 5,00 | - | - | - |
| PR 30-2 V4 | 30,0 | 0,08 | 26,0 | 2,00 | 0,08 | 191 | 146 |
| PR 30-2.5 V4 | 30,0 | 0,08 | 25,0 | 2,50 | 0,08 | 243 | 183 |
| PR 30-3 V4 | 30,0 | 0,08 | 24,0 | 3,00 | 0,15 | 288 | 214 |
| PR 30-4 V4 | 30,0 | 0,08 | 22,0 | 4,00 | 0,15 | 392 | 282 |
| PR 30-5 V4 | 30,0 | 0,08 | 20,0 | 5,00 | 0,15 | 496 | 347 |
| PR 32-1.5 V4 | 32,0 | - | 29,0 | 1,50 | - | - | - |
| PR 32-2 V4 | 32,0 | - | 28,0 | 2,00 | - | - | - |
| PR 32-2.5 V4 | 32,0 | - | 27,0 | 2,50 | - | - | - |
| PR 32-4 V4 | 32,0 | - | 26,0 | 4,00 | - | - | - |
| PR 32-6 V4 | 32,0 | - | 20,0 | 6,00 | - | - | - |
| PR 35-1.5 V 4 | 35,0 | 0,08 | 32,0 | 1,50 | 0,08 | 119 | 93 |
| PR 35-2 V4 | 35,0 | 0,15 | 31,0 | 2,00 | 0,15 | 151 | 117 |
| PR 35-2.5 V4 | 35,0 | 0,15 | 30,0 | 2,50 | 0,15 | 196 | 149 |
| PR 35-3 V4 | 35,0 | - | 29,0 | 3,00 | - | - | - |
| PR 35-4 V4 | 35,0 | - | 27,0 | 4,00 | - | - | - |
| PR 35-5 V 4 | 35,0 | 0,15 | 25,0 | 5,00 | 0,15 | 418 | 299 |
| PR 38-1.5 V4 | 38,0 | - | 35,0 | 1,50 | - | - | - |
| PR 38-2 V4 | 38,0 | - | 34,0 | 2,00 | - | - | - |
| PR 38-2.6 V4 | 38,0 | - | 32,8 | 2,60 | - | - | - |
| PR 38-3 V4 | 38,0 | - | 32,0 | 3,00 | - | - | - |
| PR 38-4 V4 | 38,0 | 0,15 | 30,0 | 4,00 | 0,15 | 303 | 224 |
| PR 38-5 V4 | 38,0 | 0,15 | 28,0 | 5,00 | 0,15 | 385 | 278 |
| PR 38-6 V4 | 38,0 | - | 26,0 | 6,00 | - | - | - |
| PR 40-2 V4 | 40,0 | - | 36,0 | 2,00 | - | - | - |
| PR 42-2 V4 | 42,0 | 0,20 | 38,0 | 2,00 | 0,20 | 118 | 92 |
| PR 42-3 V4 | 42,0 | 0,20 | 36,0 | 3,00 | 0,20 | 193 | 147 |
| PR 42-6 V4 | 42,0 | - | 30,0 | 6,00 | - | - | - |
| PR 43-1.5 V4 | 43,0 | - | 40,0 | 1,50 | - | - | - |
| PR 50-1.5 V4 | 50,0 | - | 47,0 | 1,50 | - | - | - |
| PR 50-2 V4 | 50,0 | - | 46,0 | 2,00 | - | - | - |
| PR 50-4 V4 | 50,0 | - | 42,0 | 4,00 | - | - | - |
| PR 50-5 V4 | 50,0 | - | 40,0 | 5,00 | - | - | - |
| PR 50-6 V4 | 50,0 | - | 38,0 | 6,00 | - | - | - |
| PR 54-2 V4 | 54,0 | - | 50,0 | 2,00 | - | - | - |
| PR 57-2 V4 | 57,0 | - | 53,0 | 2,00 | - | - | - |
| PR 63.5-1.5 V4 | 63,5 | - | 60,5 | 1,50 | - | - | - |
| PR 64-2 V4 | 64,0 | - | 60,0 | 2,00 | - | - | - |
| PR 70-1.5 V4 | 70,0 | - | 67,0 | 1,50 | - | - | - |
| PR 70-2 V4 | 70,0 | - | 66,0 | 2,00 | - | - | - |
| PR 70-5 V4 | 70,0 | - | 60,0 | 5,00 | - | - | - |
| PR 101.5-2 V4 | 101,5 | - | 97,5 | 2,00 | - | - | - |
| PR 108-3 V4 | 108,0 | - | 102,0 | 3,00 | - | - | - |
| PR 129-2 V4 | 129,0 | - | 125,0 | 2,00 | - | - | - |
| PR 133-4 V4 | 133,0 | - | 125,0 | 4,00 | - | - | - |
| PR 152-2 V4 | 152,0 | - | 148,0 | 2,00 | - | - | - |
| PR 159-4.5 V4 | 159,0 | - | 150,0 | 4,50 | - | - | - |
Papildu informācija
Aprēķins ir analogs DIN 2413 (projekts)
slodzes veids I: statiskā (līdz 100 °C)
slodzes veids III: dinamiskā (līdz 200 °C) svārstību diapazons = P bar
Stiprības koeficients: K 234 [N/mm2]
Drošības koeficients: S 1,5
Pastāvīgā stiprības robeža: σSch/D 190 [N/mm2]
Pielaides: DIN 10305-4elastības robeža atbilstoši DIN 10216-5 Rp no 1,0 līdz 50 °C
Saistību atruna
Neskatoties uz rūpīgu pārbaudi, mēs nevaram izslēgt kļūdas un negarantējam iekļautās informācijas pareizību.
Visa mūsu tiešsaistes katalogā iekļautā informācija balstās uz šobrīd spēkā esošajiem standartiem un profesionālo savienību noteikumiem. Tikai mūsu montāžas noteikumu ievērošana Jums garantēs izstrādājumu drošību. Visu minēto noteikumu neievērošana var negatīvi ietekmēt izstrādājuma funkcionālo drošību un būt par iemeslu mūsu garantijas zaudēšanai. Mūsu garantija jebkurā gadījumā attiecas tikai uz HANSA-FLEX izstrādājumiem. Mūsu izstrādājumi nepārtraukti tiek attīstīti, tādēļ iespējamas tehniskas izmaiņas.