K-VENTILSCHEIBE HDM 4
Valve discs for HDM valve terminal with 4 mm port
Slika izdelka
![K-VENTILSCHEIBE HDM 4 K-VENTILSCHEIBE HDM 4](/data/img/product/00020258_0.jpg)
Lastnosti
Sredstva |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
delovni tlak |
Max. vacuum 10 bar (external pilots), 3 to 7 bar (internal pilots as standard) |
krmilni tlak |
3 - 7 bar |
območje temperatur: |
-10 °C to +60 °C |
pretok |
200 Nl/min (Ø 4), 500 Nl/min (Ø 6), 800 Nl/min (Ø 8) |
število krmilnikov |
Max. 16 (e.g. 16 spring return valves) |
pomožna ročna sprožitev |
Latching (bistable), Monostable (non-latching) version also available on request |
potrebna moč |
0.6 W per pilot |
razred zaščite |
IP 65 |
Opis
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.
Navodilo
Drugi podatki na zahtevo.
Artikel
![](/images/up.gif)
razvrstiti rastoče
razvrstiti padajoče
![]() |
funkcija |
---|---|
K- 07 15 20 53 | 2 x 3/2-way, NC, monostable or 5/3-way, mid-position exhausted |
K- 07 15 20 58 | 2 x 3/2-way, NO, monostable or 5/3-way, mid-position pressurised |
K- 07 15 20 55 | 3/2-way, NC, monostable and 3/2-way, NO, monostable |
K- 07 15 20 57 | 5/2-way, monostable |
K- 07 15 20 52 | 5/2-way, monostable (uses only one pin, two signals assigned) |
K- 07 15 20 54 | 5/2-way, bistable (pulse valve) |
K- 07 15 20 56 | 5/3-way, mid-position closed |
Dodatne informacije
Zavrnitev odgovornosti
Kljub skrbnemu preverjanju napak ne moremo izključiti in za informacije, ki so tu navedene, ne prevzemamo nobene odgovornosti.
Vse informacije v našem spletnem katalogu temeljijo na trenutno veljavnih standardih in predpisih poklicnih združenj. Samo če se držite naših navodil za montažo, vam lahko zagotovimo varnost proizvodov. Neupoštevanje teh pravil lahko vpliva na zanesljivost izdelka in vodi do izgube naše garancije. Naša garancija v vsakem primeru velja samo za izdelke HANSA-FLEX. Naše izdelke se stalno dalje razvija, tehnične spremembe so torej možne.