Sprache auswählen
Bulgarisch (Български)
Chinesisch (汉语)
Englisch (English)
Estnisch (Eesti)
Französisch (Français)
Italienisch (Italiano)
Kroatisch (Hrvatski)
Lettisch (Latviešu)
Litauisch (Lietuvių k.)
Niederländisch (Nederlands)
Polnisch (Polski)
Portugiesisch (Português)
Rumänisch (Română)
Russisch (Русский)
Serbisch (Српска)
Slowakisch (Slovenčina)
Slowenisch (Slovenščina)
Spanisch (Español)
Tschechisch (Čeština)
Türkisch (Türkçe)
Ungarisch (Magyar)
PR V4 (M)
Präzisionsstahlrohr, metrisch, 1.4571
Produktbild
Eigenschaften
| Bauart |
Präzisionsstahlrohr, metrisch |
| Werkstoff |
Edelstahl 1.4571 |
| Rohrlänge |
6 Meter |
Hinweis
Die angegebenen Druckangaben beziehen sich auf gerades Rohr.
Bei gebogenem Rohr sind entsprechende Wanddicken analog zur DIN EN 13480-4 zu berechnen.
Artikel
aufwärts sortieren
abwärts sortieren
 Bezeichnung |
Ø d2 (mm) |
AD-Toleranz +/- (mm) |
Ø d1 (mm) |
S (mm) |
ID-Toleranz +/- (mm) |
Belastungsfall I (bar) |
Belastungsfall III (bar) |
|---|---|---|---|---|---|---|---|
| PR 34-2 V4 | 34,0 | - | 30,0 | 2,00 | - | - | - |
| PR 14-1 V4 | 14,0 | - | 12,0 | 1,00 | - | - | - |
| PR 04-0.5 V4 | 4,0 | - | 3,0 | 0,50 | - | - | - |
| PR 04-1 V4 | 4,0 | 0,08 | 2,0 | 1,00 | 0,15 | 600 | 408 |
| PR 05-0.5 V4 | 5,0 | - | 4,0 | 0,50 | - | - | - |
| PR 05-1 V4 | 5,0 | - | 3,0 | 1,00 | - | - | - |
| PR 06-0.5 V4 | 6,0 | 0,08 | 5,0 | 0,50 | 0,15 | - | - |
| PR 06-1 V4 | 6,0 | 0,08 | 4,0 | 1,00 | 0,15 | 400 | 287 |
| PR 06-1.5 V4 | 6,0 | 0,08 | 3,0 | 1,50 | 0,15 | 660 | 442 |
| PR 06-2 V4 | 6,0 | 0,08 | 2,0 | 2,00 | 0,15 | 915 | 575 |
| PR 08-1 V4 | 8,0 | 0,08 | 6,0 | 1,00 | 0,15 | 300 | 222 |
| PR 08-1.5 V4 | 8,0 | 0,08 | 5,0 | 1,50 | 0,15 | 495 | 347 |
| PR 08-2 V4 | 8,0 | 0,08 | 4,0 | 2,00 | 0,15 | 690 | 458 |
| PR 08-2.5 V4 | 8,0 | - | 3,0 | 2,50 | - | - | - |
| PR 10-0.5 V4 | 10,0 | 0,08 | 9,0 | 0,50 | 0,08 | 105 | 81 |
| PR 10-1 V4 | 10,0 | 0,08 | 8,0 | 1,00 | 0,15 | 240 | 181 |
| PR 10-1.2 V4 | 10,0 | - | 7,6 | 1,20 | - | - | - |
| PR 10-1.5 V4 | 10,0 | 0,08 | 7,0 | 1,50 | 0,15 | 396 | 285 |
| PR 10-2 V4 | 10,0 | 0,08 | 6,0 | 2,00 | 0,15 | 552 | 380 |
| PR 10-2.5 V4 | 10,0 | - | 5,0 | 2,50 | - | - | - |
| PR 12-1 V4 | 12,0 | 0,08 | 10,0 | 1,00 | 0,15 | 200 | 152 |
| PR 12-1.5 V4 | 12,0 | 0,08 | 9,0 | 1,50 | 0,15 | 330 | 242 |
| PR 12-2 V4 | 12,0 | 0,08 | 8,0 | 2,00 | 0,15 | 460 | 325 |
| PR 12-3 V4 | 12,0 | 0,08 | 6,0 | 3,00 | 0,25 | 694 | 461 |
| PR 13-1 V4 | 13,0 | - | 11,0 | 1,00 | - | - | - |
| PR 14-1.5 V4 | 14,0 | 0,08 | 11,0 | 1,50 | 0,15 | 283 | 210 |
| PR 14-2 V4 | 14,0 | 0,08 | 10,0 | 2,00 | 0,15 | 394 | 284 |
| PR 14-2.5 V4 | 14,0 | 0,08 | 9,0 | 2,50 | 0,15 | 505 | 353 |
| PR 14-3 V4 | 14,0 | - | 8,0 | 3,00 | - | - | - |
| PR 15-1 V4 | 15,0 | 0,08 | 13,0 | 1,00 | 0,08 | 174 | 134 |
| PR 15-1.5 V4 | 15,0 | 0,08 | 12,0 | 1,50 | 0,15 | 264 | 197 |
| PR 15-2 V4 | 15,0 | 0,08 | 11,0 | 2,00 | 0,15 | 368 | 267 |
| PR 16-1 V 4 | 16,0 | - | 14,0 | 1,00 | - | - | - |
| PR 16-1.5 V4 | 16,0 | 0,08 | 13,0 | 1,50 | 0,08 | 261 | 195 |
| PR 16-2 V4 | 16,0 | 0,08 | 12,0 | 2,00 | 0,15 | 345 | 252 |
| PR 16-2.5 V4 | 16,0 | 0,08 | 11,0 | 2,50 | 0,15 | 442 | 314 |
| PR 16-3 V4 | 16,0 | 0,08 | 10,0 | 3,00 | 0,15 | 540 | 373 |
| PR 16-4 V4 | 16,0 | - | 8,0 | 4,00 | - | - | - |
| PR 18-1 V4 | 18,0 | 0,08 | 16,0 | 1,00 | 0,08 | 145 | 112 |
| PR 18-1.5 V4 | 18,0 | 0,08 | 15,0 | 1,50 | 0,08 | 232 | 175 |
| PR 18-2 V4 | 18,0 | 0,08 | 14,0 | 2,00 | 0,08 | 318 | 234 |
| PR 18-2.5 V4 | 18,0 | 0,08 | 13,0 | 2,50 | 0,15 | 393 | 283 |
| PR 18-3 V4 | 18,0 | - | 12,0 | 3,00 | - | - | - |
| PR 18-4 V4 | 18,0 | - | 10,0 | 4,00 | - | - | - |
| PR 20-1 V 4 | 20,0 | 0,08 | 18,0 | 1,00 | - | - | - |
| PR 20-1.5 V 4 | 20,0 | 0,08 | 17,0 | 1,50 | - | - | - |
| PR 20-2 V4 | 20,0 | 0,08 | 16,0 | 2,00 | 0,08 | 287 | 213 |
| PR 20-2.5 V4 | 20,0 | 0,08 | 15,0 | 2,50 | 0,15 | 354 | 258 |
| PR 20-3 V4 | 20,0 | 0,08 | 14,0 | 3,00 | 0,15 | 432 | 308 |
| PR 20-3.5 V4 | 20,0 | 0,08 | 13,0 | 3,50 | 0,15 | 510 | 355 |
| PR 20-4 V4 | 20,0 | - | 12,0 | 4,00 | - | - | - |
| PR 22-1 V 4 | 22,0 | 0,08 | 20,0 | 1,00 | - | - | - |
| PR 22-1.5 V4 | 22,0 | 0,08 | 19,0 | 1,50 | 0,08 | 190 | 145 |
| PR 22-2 V4 | 22,0 | 0,08 | 18,0 | 2,00 | 0,08 | 260 | 195 |
| PR 22-2.5 V4 | 22,0 | 0,08 | 17,0 | 2,50 | 0,15 | 321 | 236 |
| PR 22-3 V4 | 22,0 | 0,08 | 16,0 | 3,00 | 0,15 | 392 | 283 |
| PR 22-4 V4 | 22,0 | - | 14,0 | 4,00 | - | - | - |
| PR 22-6 V4 | 22,0 | - | 10,0 | 6,00 | - | - | - |
| PR 23-1.5 V4 | 23,0 | - | 20,0 | 1,50 | - | - | - |
| PR 24-4 V4 | 24,0 | - | 16,0 | 4,00 | - | - | - |
| PR 25-1.5 V4 | 25,0 | 0,08 | 22,0 | 1,50 | 0,08 | 167 | 128 |
| PR 25-2 V4 | 25,0 | 0,08 | 21,0 | 2,00 | 0,08 | 229 | 173 |
| PR 25-2.5 V4 | 25,0 | 0,08 | 20,0 | 2,50 | 0,08 | 292 | 216 |
| PR 25-3 V4 | 25,0 | 0,08 | 19,0 | 3,00 | 0,15 | 345 | 252 |
| PR 25-4 V4 | 25,0 | - | 17,0 | 4,00 | - | - | - |
| PR 25-5 V4 | 25,0 | - | 15,0 | 5,00 | - | - | - |
| PR 25-6 V4 | 25,0 | - | 13,0 | 6,00 | - | - | - |
| PR 28-1 V4 | 28,0 | - | 26,0 | 1,00 | - | - | - |
| PR 28-1.5 V4 | 28,0 | 0,08 | 25,0 | 1,50 | 0,08 | 149 | 115 |
| PR 28-2 V4 | 28,0 | 0,08 | 24,0 | 2,00 | 0,08 | 205 | 156 |
| PR 28-2.5 V4 | 28,0 | 0,08 | 23,0 | 2,50 | 0,08 | 260 | 195 |
| PR 28-3 V4 | 28,0 | - | 22,0 | 3,00 | - | - | - |
| PR 28-4 V4 | 28,0 | - | 20,0 | 4,00 | - | - | - |
| PR 28-5 V4 | 28,0 | - | 18,0 | 5,00 | - | - | - |
| PR 30-2 V4 | 30,0 | 0,08 | 26,0 | 2,00 | 0,08 | 191 | 146 |
| PR 30-2.5 V4 | 30,0 | 0,08 | 25,0 | 2,50 | 0,08 | 243 | 183 |
| PR 30-3 V4 | 30,0 | 0,08 | 24,0 | 3,00 | 0,15 | 288 | 214 |
| PR 30-4 V4 | 30,0 | 0,08 | 22,0 | 4,00 | 0,15 | 392 | 282 |
| PR 30-5 V4 | 30,0 | 0,08 | 20,0 | 5,00 | 0,15 | 496 | 347 |
| PR 32-1.5 V4 | 32,0 | - | 29,0 | 1,50 | - | - | - |
| PR 32-2 V4 | 32,0 | - | 28,0 | 2,00 | - | - | - |
| PR 32-2.5 V4 | 32,0 | - | 27,0 | 2,50 | - | - | - |
| PR 32-4 V4 | 32,0 | - | 26,0 | 4,00 | - | - | - |
| PR 32-6 V4 | 32,0 | - | 20,0 | 6,00 | - | - | - |
| PR 35-1.5 V 4 | 35,0 | 0,08 | 32,0 | 1,50 | 0,08 | 119 | 93 |
| PR 35-2 V4 | 35,0 | 0,15 | 31,0 | 2,00 | 0,15 | 151 | 117 |
| PR 35-2.5 V4 | 35,0 | 0,15 | 30,0 | 2,50 | 0,15 | 196 | 149 |
| PR 35-3 V4 | 35,0 | - | 29,0 | 3,00 | - | - | - |
| PR 35-4 V4 | 35,0 | - | 27,0 | 4,00 | - | - | - |
| PR 35-5 V 4 | 35,0 | 0,15 | 25,0 | 5,00 | 0,15 | 418 | 299 |
| PR 38-1.5 V4 | 38,0 | - | 35,0 | 1,50 | - | - | - |
| PR 38-2 V4 | 38,0 | - | 34,0 | 2,00 | - | - | - |
| PR 38-2.6 V4 | 38,0 | - | 32,8 | 2,60 | - | - | - |
| PR 38-3 V4 | 38,0 | - | 32,0 | 3,00 | - | - | - |
| PR 38-4 V4 | 38,0 | 0,15 | 30,0 | 4,00 | 0,15 | 303 | 224 |
| PR 38-5 V4 | 38,0 | 0,15 | 28,0 | 5,00 | 0,15 | 385 | 278 |
| PR 38-6 V4 | 38,0 | - | 26,0 | 6,00 | - | - | - |
| PR 40-2 V4 | 40,0 | - | 36,0 | 2,00 | - | - | - |
| PR 42-2 V4 | 42,0 | 0,20 | 38,0 | 2,00 | 0,20 | 118 | 92 |
| PR 42-3 V4 | 42,0 | 0,20 | 36,0 | 3,00 | 0,20 | 193 | 147 |
| PR 42-6 V4 | 42,0 | - | 30,0 | 6,00 | - | - | - |
| PR 43-1.5 V4 | 43,0 | - | 40,0 | 1,50 | - | - | - |
| PR 50-1.5 V4 | 50,0 | - | 47,0 | 1,50 | - | - | - |
| PR 50-2 V4 | 50,0 | - | 46,0 | 2,00 | - | - | - |
| PR 50-4 V4 | 50,0 | - | 42,0 | 4,00 | - | - | - |
| PR 50-5 V4 | 50,0 | - | 40,0 | 5,00 | - | - | - |
| PR 50-6 V4 | 50,0 | - | 38,0 | 6,00 | - | - | - |
| PR 54-2 V4 | 54,0 | - | 50,0 | 2,00 | - | - | - |
| PR 57-2 V4 | 57,0 | - | 53,0 | 2,00 | - | - | - |
| PR 63.5-1.5 V4 | 63,5 | - | 60,5 | 1,50 | - | - | - |
| PR 64-2 V4 | 64,0 | - | 60,0 | 2,00 | - | - | - |
| PR 70-1.5 V4 | 70,0 | - | 67,0 | 1,50 | - | - | - |
| PR 70-2 V4 | 70,0 | - | 66,0 | 2,00 | - | - | - |
| PR 70-5 V4 | 70,0 | - | 60,0 | 5,00 | - | - | - |
| PR 101.5-2 V4 | 101,5 | - | 97,5 | 2,00 | - | - | - |
| PR 108-3 V4 | 108,0 | - | 102,0 | 3,00 | - | - | - |
| PR 129-2 V4 | 129,0 | - | 125,0 | 2,00 | - | - | - |
| PR 133-4 V4 | 133,0 | - | 125,0 | 4,00 | - | - | - |
| PR 152-2 V4 | 152,0 | - | 148,0 | 2,00 | - | - | - |
| PR 159-4.5 V4 | 159,0 | - | 150,0 | 4,50 | - | - | - |
Zusätzliche Informationen
Berechnung analog DIN 2413 (Entwurf)
Belastungsfall I : Statisch (bis 100 °C)
Belastungsfall III : Dynamisch (bis 200 °C) Schwingbreite = P bar
Festigkeitskennwert: K 234 [N/mm2]
Sicherheitsbeiwert: S 1,5
Dauerschwellfestigkeit: σSch/D 190 [N/mm2]
Toleranzen: DIN 10305-4
Dehngrenze nach DIN 10216-5 Rp 1,0 bis 50 °C
Haftungsausschluss
Trotz sorgfältigster Prüfung können wir Fehler nicht ausschließen und übernehmen keine Gewähr für die enthaltenen Angaben.
Alle Angaben in unserem Online-Katalog beruhen auf den zur Zeit gültigen Normen und auf den Vorschriften der Berufsgenossenschaften. Nur die Einhaltung unserer Montagevorschriften garantieren Ihnen Produktsicherheit. Die Nichtbeachtung aller genannten Vorschriften kann die Funktionssicherheit des Produktes beeinträchtigen und zum Verlust unserer Gewährleistung führen. Unsere Gewährleistung gilt in jedem Falle nur für HANSA-FLEX Produkte. Unsere Produkte werden ständig weiterentwickelt technische Änderungen sind deshalb möglich.