GE HRED HJ
Screw-in socketsProduct image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
Shape E |
Connection 2 |
UN/UNF external threads |
Sealing form 2 |
74° outer cone |
Design |
Screw-in sockets |
Construction |
straight |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
---|---|---|---|
GE HRED 02 HJ 04 | G 1/8" -28 | 7/16"-20 UNF | 14 |
GE HRED 02 HJ 05 | G 1/8" -28 | 1/2"-20 UNF | 14 |
GE HRED 02 HJ 06 | G 1/8" -28 | 9/16"-18 UNF | 19 |
GE HRED 04 HJ | G 1/4" -19 | 7/16"-20 UNF | 19 |
GE HRED 04 HJ 05 | G 1/4" -19 | 1/2"-20 UNF | 19 |
GE HRED 04 HJ 06 | G 1/4" -19 | 9/16"-18 UNF | 19 |
GE HRED 04 HJ 08 | G 1/4" -19 | 3/4"-16 UNF | 19 |
GE HRED 06 HJ 04 | G 3/8" -19 | 7/16"-20 UNF | 22 |
GE HRED 06 HJ 05 | G 3/8" -19 | 1/2"-20 UNF | 22 |
GE HRED 06 HJ | G 3/8" -19 | 9/16"-18 UNF | 22 |
GE HRED 06 HJ 08 | G 3/8" -19 | 3/4"-16 UNF | 22 |
GE HRED 06 HJ 10 | G 3/8" -19 | 7/8"-14 UNF | 24 |
GE HRED 06 HJ 12 | G 3/8" -19 | 1.1/16" -12 UN | 27 |
GE HRED 08 HJ 04 | G 1/2" -14 | 7/16"-20 UNF | 27 |
GE HRED 08 HJ 06 | G 1/2" -14 | 9/16"-18 UNF | 27 |
GE HRED 08 HJ | G 1/2" -14 | 3/4"-16 UNF | 27 |
GE HRED 08 HJ 10 | G 1/2" -14 | 7/8"-14 UNF | 27 |
GE HRED 08 HJ 12 | G 1/2" -14 | 1.1/16" -12 UN | 27 |
GE HRED 12 HJ 08 | G 3/4" -14 | 3/4"-16 UNF | 32 |
GE HRED 12 HJ 10 | G 3/4" -14 | 7/8"-14 UNF | 32 |
GE HRED 12 HJ | G 3/4" -14 | 1.1/16" -12 UN | 32 |
GE HRED 12 HJ 16 | G 3/4" -14 | 1.5/16" -12 UN | 36 |
GE HRED 16 HJ 12 | G 1" -11 | 1.1/16" -12 UN | 41 |
GE HRED 16 HJ | G 1" -11 | 1.5/16" -12 UN | 41 |
GE HRED 16 HJ 20 | G 1" -11 | 1.5/8" -12 UN | 46 |
GE HRED 16 HJ 24 | G 1" -11 | 1.7/8" -12 UN | 50 |
GE HRED 20 HJ 16 | G 1.1/4" -11 | 1.5/16" -12 UN | 50 |
GE HRED 20 HJ | G 1.1/4" -11 | 1.5/8" -12 UN | 50 |
GE HRED 20 HJ 24 | G 1.1/4" -11 | 1.7/8" -12 UN | 50 |
GE HRED 24 HJ 20 | G 1.1/2" -11 | 1.5/8" -12 UN | 55 |
GE HRED 24 HJ | G 1.1/2" -11 | 1.7/8" -12 UN | 55 |
AF = Width across flats
Spare parts
- WD
- Soft seal for ED fittings
Product versions
This product is also available in the following designs:
- GE HRED HJ VA
- Screw-in sockets, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.