Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GE HMED AJ
Screw-in sockets
Product image
Properties
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
Shape E |
| Connection 2 |
UN/UNF nut threads |
| Sealing form 2 |
74° inner cone |
| Design |
Screw-in sockets |
| Construction |
straight |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
G1 | G2 | AF (mm) |
S1 |
|---|---|---|---|---|
| GE HMED 10 AJ 04 | M 10 x 1 | 7/16"-20 UNF | 14 | 16 |
| GE HMED 12 AJ 05 | M 12 x 1.5 | 1/2"-20 UNF | 17 | 17 |
| GE HMED 14 AJ 06 | M 14 x 1.5 | 9/16"-18 UNF | 19 | 19 |
| GE HMED 16 AJ 08 | M 16 x 1.5 | 3/4"-16 UNF | 22 | 22 |
| GE HMED 22 AJ 10 | M 22 x 1.5 | 7/8"-14 UNF | 27 | 27 |
| GE HMED 27 AJ 12 | M 27 x 2 | 1.1/16" -12 UN | 32 | 32 |
| GE HMED 33 AJ 16 | M 33 x 2 | 1.5/16" -12 UN | 41 | 38 |
SW, S1, S2 = With across flats
Spare parts
- WD
- Soft seal for ED fittings
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.