SRS SIP
Locking plate for single pipe clampProduct image
Properties
Design |
for single pipe clamps |
Series |
heavy |
Standard |
DIN 3015-2 |
Material |
Steel |
Surface |
Size 1 to size 4 electro galvanised uncoated from size 5 |
Item
Sort upwards
Sort downwards
Identification | Clamp size | a1 (mm) |
a2 (mm) |
B (mm) |
L (mm) |
S (mm) |
---|---|---|---|---|---|---|
SRS SIP 30 | 1 | 14,0 | 15,5 | 30 | 55 | 8 |
SRS SIP 40 | 2 | 26,0 | 15,5 | 30 | 70 | 8 |
SRS SIP 50 | 3 | 41,0 | 15,5 | 30 | 85 | 8 |
SRS SIP 60 | 4 | 69,0 | 17,5 | 45 | 115 | 10 |
SRS SIP 70 | 5 | 97,0 | 21,5 | 60 | 152 | 10 |
SRS SIP 80 | 6 | 137,0 | 27,5 | 80 | 205 | 15 |
SRS SIP 90 | 7 | 169,0 | 30,5 | 90 | 250 | 15 |
SRS SIP 100 | 8 | 219,0 | 36,5 | 120 | 320 | 25 |
Product versions
This product is also available in the following designs:
- SRS SIP V4
- Locking plate for single pipe clamp, Stainless steel 1.4571
Additional element for following products
- C A
- Configuration of group C composition
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.