SRS 0 PP
Pipe clamp, light seriesProduct image
Properties
Design |
Pipe clamp |
Construction type |
Inside of clamp with web |
Series |
light |
Standard |
DIN 3015-1 |
Temp. min. |
-30 °C |
Temp. max. |
90 °C |
Material |
Polypropylene |
Description
Webs in the inner surface of the clamps dampen impacts and vibrations and absorb forces along the pipe axis.
A gap between the two halves pretensions the pipe.
Item
Sort upwards
Sort downwards
Identification | External pipe Ø d2 (mm) |
External pipe Ø d2 | Clamp size | e1 (mm) |
H (mm) |
L (mm) |
S1 (mm) |
---|---|---|---|---|---|---|---|
SRS 0106 PP | 6,0 | - | 0 | 10 | 27 | 28 | 0,6 |
SRS 0106.4 PP | 6,4 | 1/4" | 0 | 10 | 27 | 28 | 0,6 |
SRS 0108 PP | 8,0 | 5/16" | 0 | 10 | 27 | 28 | 0,6 |
SRS 0109.5 PP | 9,5 | 3/8" | 0 | 10 | 27 | 28 | 0,6 |
SRS 0110 PP | 10,0 | - | 0 | 10 | 27 | 28 | 0,6 |
SRS 0112 PP | 12,0 | - | 0 | 10 | 27 | 28 | 0,6 |
Ordering information
1 piece = 2 halves of clamp
Product versions
This product is also available in the following designs:
- SRS 0 PA
- Pipe clamp, light series, Polyamide 6
Additional element for following products
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.