SRS DPD 30-100
Double cover plate for single pipe clampProduct image
Properties
Design |
for single pipe clamps |
Series |
heavy |
Standard |
DIN 3015-2 |
Material |
Steel |
Surface |
Size 1 to size 7 electro galvanised uncoated size 8 |
Item
Sort upwards
Sort downwards
Identification | Clamp size | B (mm) |
C (mm) |
e1 (mm) |
L (mm) |
S (mm) |
---|---|---|---|---|---|---|
SRS DPD 30 | 1 | 60 | 11,0 | 33 | 55 | 8 |
SRS DPD 40 | 2 | 60 | 11,0 | 45 | 70 | 8 |
SRS DPD 50 | 3 | 60 | 11,0 | 60 | 85 | 8 |
SRS DPD 60 | 4 | 90 | 14,0 | 90 | 115 | 10 |
SRS DPD 70 | 5 | 120 | 18,0 | 122 | 152 | 10 |
SRS DPD 80 | 6 | 160 | 24,0 | 168 | 205 | 15 |
SRS DPD 90 | 7 | 180 | 28,0 | 205 | 250 | 15 |
SRS DPD 100 | 8 | 240 | 34,0 | 265 | 322 | 25 |
Additional element for following products
- C D
- Configuration of group C double
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.