AFS 90 S (3000 PSI)
SAE socket weld flange, angle 90Product image
Properties
Pressure series |
3000 psi |
Standard |
SAE J 518 C ISO 6162 |
Construction |
Angle 90° |
Design |
SAE socket weld flange |
Mounting |
Screw bore hole |
Scope of supply |
flange only |
Material |
S355J2G3 (ST52.3) |
Surface |
black oiled |
Note
The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
Identification | PB 10.9 (bar) |
Size | Ø A (mm) |
Ø B (mm) |
C (mm) |
E (mm) |
F1 (mm) |
I (mm) |
S1 (mm) |
S2 (mm) |
L (mm) |
M metr. | M unc |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AFS 80/90 S | 350 | 1/2" | 21,6 | 13 | 38,1 | 17,5 | 60 | 10 | 20 | 37 | 9,0 | M 8 x 30 | 5/16" x 1.1/4" |
AFS 80/90 S 038 | 350 | 1/2" | 17,5 | 13 | 38,1 | 17,5 | 60 | 10 | 20 | 37 | 9,0 | M 8 x 30 | 5/16" x 1.1/4" |
AFS 100/90 S | 350 | 3/4" | 27,2 | 19 | 47,6 | 22,2 | 63 | 10 | 24 | 38 | 11,0 | M 10 x 35 | 3/8" x 1.1/2" |
AFS 102/90 S | 315 | 1" | 35,0 | 25 | 52,4 | 26,2 | 70 | 12 | 28 | 43 | 11,0 | M 10 x 35 | 3/8" x 1.1/2" |
AFS 104/90 S | 250 | 1.1/4" | 42,8 | 32 | 58,7 | 30,2 | 85 | 14 | 34 | 51 | 11,5 | M 10 x 40 | 7/16" x 1.1/2" |
AFS 106/90 S | 200 | 1.1/2" | 48,6 | 38 | 69,9 | 35,7 | 95 | 16 | 38 | 56 | 13,5 | M 12 x 45 | 1/2" x 1.3/4" |
AFS 108/90 S | 200 | 2" | 61,0 | 51 | 77,8 | 42,9 | 110 | 18 | 42 | 65 | 13,5 | M 12 x 45 | 5/8" x 2" |
PN = Nominal pressure PB = Max. operating pressure
Product versions
This product is also available in the following designs:
- AFS 90 S M (3000 / 6000 PSI)
- SAE socket weld flange, angle 90, with metric screw set and O-ring
- AFS 90 S U (3000 / 6000 PSI)
- SAE socket weld flange, angle 90, with UNC screw set and O-ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.