SNK KK M
Conical lubricating nipple with plastic ball
Product image
![SNK KK M SNK KK M](/data/img/product/SNK_KK1110-1,00.jpg)
![SNK KK M - data/img/product/SNKKKxx_MEx.gif data/img/product/SNKKKxx_MEx.gif - SNK KK M](/data/img/product/SNKKKxx_MEx.gif)
Properties
Connection 1 |
metric conical outer thread |
Sealing form 1 |
thread seal |
Connection 2 |
Lubricating nipple |
Design |
Hydraulic-type lubricating nipple |
Construction type |
with plastic ball |
Construction |
straight |
Standard |
DIN 71412 |
Additional feature |
Lubricating nipple head diameter 6,5 mm |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
G1 | i (mm) |
L (mm) |
AF (mm) |
---|---|---|---|---|
SNK KK M06-1.00 | M 6 x 1 K | 5,5 | 15 | 7 |
SNK KK M08-1.00 | M 8 x 1 K | 5,5 | 15 | 9 |
SNK KK M10-1.00 | M 10 x 1 K | 5,5 | 15 | 11 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.