Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
VOM
Pre-assembly sockets
Product image
Properties
| Design |
Pre-assembly sockets |
| Material |
Hardened tool steel |
| Surface |
phosphate treated |
Description
for manual fitting
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Ø d (mm) |
G1 | T +/- 0.05 (mm) |
|---|---|---|---|---|
| VOM 04 LL | LL | 4 | M 8 x 1 | 4,0 |
| VOM 06 LL | LL | 6 | M 10 x 1 | 5,5 |
| VOM 08 LL | LL | 8 | M 12 x 1 | 5,5 |
| VOM 10 LL | LL | 10 | M 14 x 1 | 7,0 |
| VOM 12 LL | LL | 12 | M 16 x 1 | 7,0 |
| VOM NW 04 HL | L | 6 | M 12 x 1.5 | 7,0 |
| VOM NW 06 HL | L | 8 | M 14 x 1.5 | 7,0 |
| VOM NW 08 HL | L | 10 | M 16 x 1.5 | 7,0 |
| VOM NW 10 HL | L | 12 | M 18 x 1.5 | 7,0 |
| VOM NW 13 HL | L | 15 | M 22 x 1.5 | 7,0 |
| VOM NW 16 HL | L | 18 | M 26 x 1.5 | 7,5 |
| VOM NW 20 HL | L | 22 | M 30 x 2 | 7,5 |
| VOM NW 25 HL | L | 28 | M 36 x 2 | 7,5 |
| VOM NW 32 HL | L | 35 | M 45 x 2 | 10,5 |
| VOM NW 40 HL | L | 42 | M 52 x 2 | 11,0 |
| VOM NW 03 HS | S | 6 | M 14 x 1.5 | 7,0 |
| VOM NW 04 HS | S | 8 | M 16 x 1.5 | 7,0 |
| VOM NW 06 HS | S | 10 | M 18 x 1.5 | 7,5 |
| VOM NW 08 HS | S | 12 | M 20 x 1.5 | 7,5 |
| VOM NW 10 HS | S | 14 | M 22 x 1.5 | 8,0 |
| VOM NW 13 HS | S | 16 | M 24 x 1.5 | 8,5 |
| VOM NW 16 HS | S | 20 | M 30 x 2 | 10,5 |
| VOM NW 20 HS | S | 25 | M 36 x 2 | 12,0 |
| VOM NW 25 HS | S | 30 | M 42 x 2 | 13,5 |
| VOM NW 32 HS | S | 38 | M 52 x 2 | 16,0 |
Series: LL = Very light L = Light S = Heavy
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.