W90 HRK IR
Screw-in socket, angle 90°
Product image
![W90 HRK IR W90 HRK IR](/data/img/product/W90_HRK_IR_Foto_N.jpg)
![W90 HRK IR - data/img/product/W90_HRK_IR_MEx.gif data/img/product/W90_HRK_IR_MEx.gif - W90 HRK IR](/data/img/product/W90_HRK_IR_MEx.gif)
Properties
Connection 1 |
BSPT conical external threads |
Sealing form 1 |
thread seal |
Connection 2 |
BSP cylindrical internal threads |
Sealing form 2 |
Flat seal |
Design |
Screw-in sockets |
Construction |
Angle 90° |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
G1 | G2 | AF (mm) |
---|---|---|---|
W90 HRK 02 IR | R 1/8" K | G 1/8" -28 | 14 |
W90 HRK 04 IR | R 1/4" K | G 1/4" -19 | 19 |
W90 HRK 06 IR | R 3/8" K | G 3/8" -19 | 22 |
W90 HRK 08 IR | R 1/2" K | G 1/2" -14 | 27 |
W90 HRK 12 IR | R 3/4" K | G 3/4" -14 | 32 |
W90 HRK 16 IR | R 1" K | G 1" -11 | 41 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.