BOE
Oil drain screw with valveProduct image
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
Shape A |
Connection 2 |
metric cylindrical outer thread |
Design |
Drain valve |
Scope of supply |
with copper ring and cap |
Temp. min. |
-30 °C |
Temp. max. |
200 °C |
Description
The BOE oil drain screw is closed at rest (O-ring seal). When the oil drain hose is unscrewed, the valve is opened, allowing the oil to drain.
Note
Material for seal washer in protective cap: NBR.
Seal material on valve seat: FPM (Viton)
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | Material |
---|---|---|---|
BOE 12-1.5 | M 12 x 1.5 | M 22 x 1.5 | Steel |
BOE 14-1.5 | M 14 x 1.5 | M 22 x 1.5 | Steel |
BOE 16-1.5 | M 16 x 1.5 | M 22 x 1.5 | Steel |
BOE 18-1.5 | M 18 x 1.5 | M 26 x 1.5 | Steel |
BOE 20-1.5 | M 20 x 1.5 | M 26 x 1.5 | Steel |
BOE 20-1.75 | M 20 x 1.75 | M 26 x 1.5 | Steel |
BOE 22-1.5 | M 22 x 1.5 | M 26 x 1.5 | Steel |
BOE 22-1.75 | M 22 x 1.75 | M 26 x 1.5 | Steel |
BOE 24-1.5 | M 24 x 1.5 | M 26 x 1.5 | Brass |
BOE 24-2 | M 24 x 2 | M 26 x 1.5 | Brass |
BOE 26-1.5 | M 26 x 1.5 | M 26 x 1.5 | Brass |
BOE 30-1.5 | M 30 x 1.5 | M 26 x 1.5 | Brass |
BOE 30-2 | M 30 x 2 | M 26 x 1.5 | Brass |
BOE 32-1.5 | M 32 x 1.5 | M 26 x 1.5 | Brass |
BOE 36-1.5 | M 36 x 1.5 | M 26 x 1.5 | Brass |
BOE 36-2 | M 36 x 2 | M 26 x 1.5 | Brass |
BOE 38-1.5 | M 38 x 1.5 | M 26 x 1.5 | Brass |
Accessories
- BOE ABLASS
- Oil drain hose
- BOE ABLASS 90
- Oil drain hose
Spare parts
- BOE DICHTSCHEIBE
- Sealing washer for BOE drain screw
- BOE KAPPE
- Cap for drain screws
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.