Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
3 BKR TK VZ
3-way ball valve in block design
Product image
Properties
| Connection 1 - 3 |
BSP cylindrical internal threads |
| Sealing form 1 - 3 |
for screw-in pins with shapes A, B and if necessary E. |
| Construction |
Compact construction |
| Bore |
T shaped |
| Contact travel |
0°; 90° |
| Temp. min. |
-10 °C |
| Temp. max. |
80 °C |
| Material |
Steel housing, ball and operating shaft POM ball seal NBR O-ring |
| Surface |
electro galvanised |
Note
Please refer to the operating instructions for ball valves.
Note the permissible pressure limits for the connecting elements.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Connecting thread | Overlap | LW (mm) |
Operating pressure | AF (mm) |
SF* |
|---|---|---|---|---|---|---|---|
| 3 BKR 04 TK VZ | 4 | G 1/8" -28 | negative (open) | 5,0 | PN 400 | 9 | 1,5 |
| 3 BKR 06 TK VZ | 6 | G 1/4" -19 | negative (open) | 6,0 | PN 400 | 9 | 1,5 |
| 3 BKR 10 TK VZ | 10 | G 3/8" -19 | negative (open) | 9,0 | PN 400 | 9 | 1,5 |
| 3 BKR 13 TK VZ | 12 | G 1/2" -14 | negative (open) | 11,5 | PN 350 | 9 | 1,5 |
DN = Nominal diameter, nominal width – LW = Clearance – PN = Nominal pressure PB = Max. operating pressure – AF = Width across flats – SF = Safety factor
Product versions
This product is also available in the following designs:
- 3 BKR TK
- 3-way ball valve in block design, burnished
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.