Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-GMM H
Glycerine-filled pressure gauges, connection on rear
Product image
Properties
| Type |
213.40 |
| Design |
Glycerine-filled Bourdon-tube pressure gauge |
| Application |
For gaseous or liquid media which do not corrode copper alloy,do not have high viscosity and do not crystallise |
| Accuracy class |
1,6 (Ø 63 mm), 1,0 (Ø 100 mm) |
| Media temperature |
max. +60 °C |
| Ambient temperature |
-20 °C to +60 °C |
| Crimp ring |
CrNi steel |
| Housing |
Pressed brass |
| Measuring element |
Copper alloy (Ø 63), Copper alloy < 100 bar CrNi steel 1.4571 ≥ 100 bar (Ø 100) |
| Inspection glass |
Plexiglass |
| Movement |
Copper alloy |
Description
For measuring points with high dynamic pressure loads and vibrations
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Measuring range | Ø (mm) |
Connection |
|---|---|---|---|
| K- 07 20 02 56 | -1 / 0.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 57 | 0 - 1.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 58 | 0 - 1.6 bar | 100,0 | G 1/2" |
| K- 07 20 02 59 | 0 - 2.5 bar | 100,0 | G 1/2" |
| K- 07 20 02 60 | 0 - 4.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 61 | 0 - 6.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 62 | 0 - 10.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 63 | 0 - 16.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 64 | 0 - 25.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 65 | 0 - 40.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 66 | 0 - 60.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 67 | 0 - 100.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 68 | 0 - 160.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 69 | 0 - 250.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 70 | 0 - 400.0 bar | 100,0 | G 1/2" |
| K- 07 20 02 71 | 0 - 600.0 bar | 100,0 | G 1/2" |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.