SVB ND
Hose connectorsProduct image
Properties
Connection 1 |
Hose connection |
Connection 2 |
Hose connection |
Standard |
DIN 20038 |
Media |
Compressed air |
Material |
Steel |
Description
maximum hole size for greatest possible flow rate
rotating nozzle contour enables perfect hose seating
Note
To be integrated with DIN 20,039 A hose clamps.
Item
Sort upwards
Sort downwards
Identification | for hose ID (mm) |
Ø ID (mm) |
b (mm) |
Length (mm) |
Operating pressure |
---|---|---|---|---|---|
SVB 10 ND | 10 | 8,00 | 11,0 | 75 | PN 25 |
SVB 13 ND | 13 | 9,00 | 13,5 | 80 | PN 25 |
SVB 15 ND | 15 | 12,00 | 17,0 | 105 | PN 25 |
SVB 19 ND | 19 | 16,00 | 21,0 | 105 | PN 25 |
SVB 25 ND | 25 | 22,00 | 26,5 | 160 | PN 25 |
SVB 32 ND | 32 | 27,00 | 33,5 | 175 | PN 25 |
SVB 38 ND | 38 | 33,00 | 40,0 | 215 | PN 25 |
SVB 50 ND | 50 | 45,00 | 51,0 | 225 | PN 25 |
SVB 53 ND | 53 | 46,00 | 54,0 | 225 | PN 25 |
Ø ID = Through hole
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.