Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TRD
Threaded nozzle
Product image
Properties
| Application |
in construction, mining and tunnel building |
| Connection 1 |
round external thread |
| Connection 2 |
Hose connection |
| Media |
Compressed air, water |
| Material |
Steel |
| Surface |
electro galvanised |
Description
fits conical nozzle threaded connections
rotating nozzle contour enables perfect hose seating
Note
To be integrated with DIN 20,039 A hose clamps.
Item
Sort upwards
Sort downwards
 Identification |
for hose ID (mm) |
G1 | Ø ID (mm) |
Length (mm) |
Nozzle length (mm) |
AF (mm) |
Cone | Operating pressure |
|---|---|---|---|---|---|---|---|---|
| TRD 32-13 MM | 13 | Rd 32 x 1/8" | 10,00 | 75 | 41 | 32 | 1:3 | PN 25 |
| TRD 32-16 MM | 16 | Rd 32 x 1/8" | 12,00 | 75 | 41 | 32 | 1:3 | PN 25 |
| TRD 32-19 MM | 19 | Rd 32 x 1/8" | 15,00 | 75 | 41 | 32 | 1:3 | PN 25 |
| TRD 32-25 MM | 25 | Rd 32 x 1/8" | 20,00 | 75 | 41 | 32 | 1:3 | PN 25 |
AF = Width across flats – Ø ID = Through hole
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.