HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-LECKAGESUCHGERAET

Leakage finder
Hide product imageProduct image
K-LECKAGESUCHGERAET
Hide propertiesProperties
Working frequency 40 kHz ± 2 kHz
Connection 4-pin connection for headphones and charger, 3.5 mm stereo jack for connecting sensor and cable
Laser as an visual tools Wave length: 655 to 660 nm, Output power: 0.4 to 0.5 mW
Power supply Internal NiMH rechargeable battery
Operating time Approx. 6 hours without laser / 4 hours with laser
Charging time Approx. 1.5 hours
Fit Temperature 0 °C to +40 °C
Lagertemperatur -10 °C to +50 °C
Hide descriptionDescription

Function: The annual energy cost of leaks in pneumatic and gas systems are high and avoidable. When these gases flow unused out of leaks, they create noises inaudible to the human ear. With the LS 100, even the smallest leaks can be heard from several metres distance. It transforms inaudible signals to a frequency that can be detected visually on the display and acoustically with the supplied sound-proof headphones. Use: leakage inspections of pneumatic, gas, steam and vacuum systems.
The advantages of the LS 100: Simple and quick measurement, even from distances of several metres
Measurements can be taken on running systems, without affecting their operation
The device is quickly amortised by the high cost savings

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Hide product accessoriesAccessories
K-ALU-TELESKOPSTANGE
Aluminium-telescopic pole
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.