Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-VERTEILER 3-FACH HANSA PRO
Distributor 3-fold with pressure switch, HANSA PRO
Product image
Properties
| Media temperature |
-10 °C to +50 °C |
| Ambient temperature |
-10 °C to +50 °C |
| Media |
Compressed air |
| Mounting type |
Line mounting, mounting kit or wall mounting |
| Installation position |
Any |
| Adjustment range |
0,3 - 2 bar |
| Nominal flow-rate G1/2 |
11.000 l/min (P1 = 6 bar/Delta P = 1 bar) |
| Nominal flow-rate G 3/8 |
7.250 l/min (P1 = 6 bar/Delta P = 1 bar) |
| standard nominal flow rate rear (P – E) |
2.250 l/min (P1 = 6 bar/Delta P = 1 bar) |
| standard nominal flow rate top (P – D) |
2.250 l/min (P1 = 6 bar/Delta P = 1 bar) |
| standard nominal flow rate bottom (P – B) |
5.500 l/min (P1 = 6 bar/Delta P = 1 bar) |
| standard nominal flow rate front (P – C) |
2.250 l/min (P1 = 6 bar/Delta P = 1 bar) |
| PE max 11 |
16 bar |
| Housing |
PA66 |
Item
Sort upwards
Sort downwards
 Identification |
Port P + A | Port B | Port C | Port D | Port E | Burst pressure (bar) |
Size |
|---|---|---|---|---|---|---|---|
| K- 07 25 22 38 | G 3/8 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 5 | 2 |
| K- 07 25 22 39 | G 3/8 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 10 | 2 |
| K- 07 25 22 40 | G 3/8 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 20 | 2 |
| K- 07 25 22 41 | G 3/8 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 25 | 2 |
| K- 07 25 22 42 | G 1/2 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 5 | 2 |
| K- 07 25 22 43 | G 1/2 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 10 | 2 |
| K- 07 25 22 44 | G 1/2 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 20 | 2 |
| K- 07 25 22 45 | G 1/2 i | G 1/2 i | G 3/8 i | G 1/4 i | G 3/8 i | 25 | 2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.