HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-FI FEIN HANSA PRO

Compressed air fine filter, with manual/semi-automatic condensate drain, HANSA PRO
Hide product imageProduct image
K-FI FEIN HANSA PRO data/img/product/K-FI PROBLOC-1 FEIN_MASSZ.jpg - K-FI FEIN HANSA PRO
Hide propertiesProperties
Media temperature -10 °C to +50 °C
Ambient temperature -10 °C to +50 °C
Media Compressed air
Design fiber filter
Mounting type Line mounting, mounting kit or wall mounting
Installation position Vertical, drain down
Filter rating 0,01 μm
filter efficiency 99.999 %
Nominal flow-rate G1/2 750 l/min (P1 = 6 bar/Delta P = 0,1 bar)
Nominal flow-rate G 3/8 750 l/min (P1 = 6 bar/Delta P = 0,1 bar)
Pe max 16 bar
Filter element Borsilicate-Al
Housing PA66
Residual oil content 0,01 mg/m3
Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.