HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-DRG MANO HANSA PRO

Pressure regulator, with pressure gauge, HANSA PRO
Hide product imageProduct image
K-DRG MANO HANSA PRO data/img/product/K-PROBLOC2_DREGLRMANO_zeich.jpg - K-DRG MANO HANSA PRO
Hide propertiesProperties
Output pressure Pa 0,5 - 8 bar (Standart)
Pa 0,1 - 1 bar
Pa 0,1 - 2 bar
Pa 0,2 - 4 bar
Pa 0,5 - 10 bar
Pa 0,5 - 16 bar
Media temperature -10 °C to +50 °C
Ambient temperature -10 °C to +50 °C
Media Compressed air
Design Diaphragm pressure regulator with relieving
Mounting type Line mounting, panel mounting, mounting kit or wall mounting
actuation type/lock lockable handwheel
Installation position Any
Thread pressure gauge G 1/4 i
Nominal flow-rate G1/2 5.100 l/min (P1 = 10 bar, P2 = 6,3 bar/Delta P = 1 bar)
Nominal flow-rate G 3/8 4.300 l/min (P1 = 10 bar, P2 = 6,3 bar/Delta P = 1 bar)
Pe max 16 bar
Housing PA66
Diaphragm, seals Ms/NBR/PA6
Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.